Sharp PN-L803CA Скачать руководство пользователя страница 17

Страница: 17 / 69

Caution

• Turn on the monitor first before turning on the computer or

playback device.

• When switching the main power switch or the POWER

button off and back on, always wait for at least 5 seconds.

A short interval may result in a malfunction.

Turning on the main power

Main power switch

Caution

• The main power must be turned on/off with the main power

switch. Do not connect/disconnect the power cord or turn

the breaker on/off while the main power switch is on.

• For a complete electrical disconnection, pull out the main

plug.

Turning power on

Press the POWER button to turn the power ON.

Power LED POWER button

Status

Status of the monitor

Green lit

Power on

Orange lit

Power off (Standby mode)

Green flashing

Input signal waiting mode

TIPS

• You can fix the input mode that appears after startup. Set

START INPUT MODE on the SETUP menu.

Turning Power On/Off

Turning power off

Turning power off with monitor buttons

POWER button

1. Touch the POWER button.

The recognition screen appears.

2. Touch [OK].

The power is turned off. (Standby mode)

TIPS

• If about 15 seconds elapses while the recognition screen

appears, the power will automatically turn off.

Turning power off with remote control unit

1. Press the POWER button.

The power is turned off. (Standby mode)

TIPS

• When the main power switch is off, the monitor cannot be

turned on.

• If the monitor is in input signal waiting mode and you press

the POWER button, the monitor enters standby mode.

• Setting the SCHEDULE flashes the power LED alternately

in red and orange in standby mode.

• To disable the logo screen from displaying when turning the

power ON, set LOGO SCREEN to OFF on the OTHERS

menu. (See page 35.)

Содержание PN-L803CA






































































Результаты поиска

Содержание PN-L803CA

Отзывы:

Похожие инструкции для PN-L803CA

Бренды по названию

Популярные бренды

Sharp PN-L803CA, Инструкции по эксплуатации

Результаты поиска

Содержание PN-L803CA

Отзывы:

Похожие инструкции для PN-L803CA

Бренды по названию

Популярные бренды