Sharp PN-L803CA Скачать руководство пользователя страница 12

Страница: 12 / 69

Connecting Peripheral Equipment

Caution

• Be sure to turn off the main power switch and disconnect

the plug from the power outlet before connecting/

disconnecting cables. Also, read the manual of the

equipment to be connected.

• Be careful not to confuse the input terminal with the output

terminal when connecting cables. Accidentally reversing

cables connected to the input and output terminals may

cause malfunctions and the other problems.

• Do not use any cable that has a damaged or deformed

terminal. Using such cables may cause malfunctions.

TIPS

•

When using a touch panel, connect the USB cable to the

computer. For details, see the Touch pen Management Tool

Operation Manual.

• Images may not be displayed properly depending on the

computer (video card) to be connected.

• Use the automatic screen adjustment when a computer

screen is displayed for the first time using D-SUB1 or

D-SUB2, or when the setting of the computer is changed.

The screen is adjusted automatically when SELF ADJUST

in the MONITOR menu is set to ON.

• If the audio output from the playback device is connected

directly to speakers or other devices, the video on the

monitor may appear delayed from the audio portion.

Audio should be played through this monitor by connecting

the playback device to the monitor’s audio input, and

connecting the monitor’s audio output to the speakers or

other devices.

• The audio input terminals used in each input mode are

factory-set as follows.

Input mode

Audio input terminal

(Factory setting)

D-SUB1

Audio 1 input terminal

D-SUB2

Audio 2 input terminal

DisplayPort

DisplayPort input terminal

HDMI1

HDMI 1 input terminal

HDMI2

HDMI 2 input terminal

HDMI3

HDMI 3 input terminal

It is convenient to use the terminals for separate purposes;

For example, using the terminal on the bottom of the monitor

to connect a fixed computer and using the terminal on the side

of the monitor to connect a mobile computer.

HDMI 1 input terminal

2. HDMI 2 input terminal

3. HDMI 3 input terminal

• Use a commercially available HDMI cable (conforming to

the HDMI standard).

• Set HDMI1/HDMI2/HDMI3 of INPUT SELECT on the

SETUP menu according to the device to be connected.

• Select the audio input terminal to be used in AUDIO

SELECT of the SETUP menu.

When HDMI is selected, it is not necessary to connect an

audio cable to the audio input terminal.

4. DisplayPort input terminal

• Use a commercially available DisplayPort cable

(conforming to the DisplayPort standard).

• Select the audio input terminal to be used in AUDIO

SELECT of the SETUP menu.

When DisplayPort is selected, it is not necessary to

connect an audio cable to the audio input terminal.

5. D-sub 1 input terminal

• Set D-SUB1 of INPUT SELECT on the SETUP menu

according to the device to be connected.

• To use with D-SUB1[VIDEO], connect the green terminal

to the device’s video output.

• Select the audio input terminal to be used in AUDIO

SELECT of the SETUP menu.

6. D-sub 2 input terminal

• Select the audio input terminal to be used in AUDIO

SELECT of the SETUP menu.

Содержание PN-L803CA






































































Результаты поиска

Содержание PN-L803CA

Отзывы:

Похожие инструкции для PN-L803CA

Бренды по названию

Популярные бренды

Sharp PN-L803CA, Инструкции по эксплуатации

Результаты поиска

Содержание PN-L803CA

Отзывы:

Похожие инструкции для PN-L803CA

Бренды по названию

Популярные бренды