Sharp PN-65TH1 Скачать руководство пользователя страница 10

Страница: 10 / 62

Hardware

Must have a USB 2.0 compliant port.

CD-ROM drive required for software installation.

Operating system

Windows 8.1 (32-bit or 64-bit version), Windows 10 (32-bit or 64-bit version)
macOS v10.13, v10.14

(The touch panel and touch pen operate with the standard driver of operating system.)
Google Chrome OS Version 59 or later

(The touch panel and touch pen operate with the standard driver of operating system.)

Requirements when the software (Windows) supplied with this monitor is used.

CPU

Intel Core i5-6360U or faster

Intel Core i7-6650U or faster recommended

Video Output

Must be capable of output at a Vsync of 60 Hz or higher

Memory

At least 4 GB

Free space on hard drive At least 5 GB (free space separately required for data storage)

To use a touch panel with a computer connected to the video input terminal on this monitor, TOUCH PANEL1 terminal on the

side and computer must be connected using the supplied USB cable, and Touch pen Management Tool must be installed on the

computer from the supplied CD-ROM. (Factory setting)

To use the TOUCH PANEL2 terminal on the bottom, change the setting for the terminal used in TOUCH INPUT SELECT in the

SETUP menu to TOUCH PANEL2.

Install Pen Software from the supplied CD-ROM.

When the Information Display Downloader is installed, you can check and download the most recent versions of the software

programs.

To install the software, see the manual for each.

Touch Viewing Software setup program and SHARP Display Connect setup program can be downloaded using Information

Display Downloader.

Supplied Components

If any component should be missing, please contact your dealer.



Liquid Crystal Display Monitor: 1



Remote control unit: 1



Cable clamp: 2



Cable clamp (affixing type): 3



Power cord



R03 battery (“AAA” size): 2



CD-ROM (Utility Disk for Windows): 1



SHARP Display Connect License: 1



Setup Manual: 1



Specification sheet



Touch pen: 1 (PN-85TH1: 2)



Eraser: 1



Tray: 1



USB flash drive / SD card cover: 1



Speaker cover: 2



Camera mount: 1



Tray mounting screws,

Speaker cover attachment screws (M3x10): 9



Camera mount screws (M3x5): 2



USB flash drive / SD card cover fixing screw (knurled screw): 1



Camera screw (inch thread): 1



Wireless LAN antenna: 2



USB cable: 1



Vertical sticker (Logo): 1



Cover SHARP logo: 1

Place this sticker onto the SHARP logo to cover the logo.

* SHARP Corporation holds authorship rights to the Utility Disk program. Do not reproduce it without permission.

* For environmental protection!

Do not dispose of batteries in household waste. Follow the disposal instructions for your area.

System Requirements

Содержание PN-65TH1































































Результаты поиска

Содержание PN-65TH1

Отзывы:

Похожие инструкции для PN-65TH1

Бренды по названию

Популярные бренды

Sharp PN-65TH1, Руководство по эксплуатации

Результаты поиска

Содержание PN-65TH1

Отзывы:

Похожие инструкции для PN-65TH1

Бренды по названию

Популярные бренды