27
E
Basic Operation
8. ENTER
Confirms the setting.
9. FREEZE
Freezes the video shown on the monitor.
To cancel, press any button other than the POWER button,
MUTE button or VOLUME button.
Freeze is also canceled when the input signal changes
(switching to no signal, changing the resolution, etc.).
In some cases a residual image may occur. Do not freeze the
video for a long time.
10. Buttons for operating the HDMI-connected device
When HDMI CEC LINK is set to AUTO, you can operate
devices that support HDMI CEC in modes other than
APPLICATION mode.
11. ID SET
Set a number on the remote control unit. (See page 41.)
12. OPTION
Switch the input mode to APPLICATION.
When using the expansion slot to expand the functions,
input mode change alternately between APPLICATION and
OPTION.
13. DP (DisplayPort)
Switch the input mode to DisplayPort.
14. SIZE (Screen size selection)
The menu is displayed.
Press the or button to select the screen size. (See page
28.)
15. PIP/PbyP
The menu is displayed.
Press the or button to select PIP MODES/
QUAD-SCREEN MODE. (See page 39.)
16. /- (Brightness adjustment)
Pr or - displays the BRIGHT menu.
B R I G H T
15
Press + or - to adjust the brightness.
* If you do not press any buttons for about 4 seconds, the
BRIGHT menu automatically disappears.
17. INPUT (Input mode selection)
The menu is displayed.
Press the or button to select the input mode, and press
the ENTER button to enter.
* For the input modes that can be selected, see “Using the
touch menu” (see page 25).
18. MENU
Displays and turns off the menu screen. (See page 29.)
19. Cursor
These buttons are used to perform operations such as
selecting items, changing adjustment values, and moving the
cursor.
20. RETURN
Returns to the previous screen.
