Sharp Plasmacluster KC-30TX1, Руководство по эксплуатации

Страница: 37 / 76

Plasmacluster ion Shower Mode
When the air in a room suddenly becomes polluted
Beep
Beep
ー
Fan Speed
Press the Fan Speed Button to change settings as follows:
The full-power operation is carried out at slightly
strong air volume for 60 minutes to purify air rapidly.
The operation status automatically returns to
the previous status in 60 minutes.
Select a preferred
fan speed
Beep,
Beep
Beep
Beep
Beep Beep
Monitors the room condition with the “Dust, Odor, Temperature and Humidity Sensor” and
automatically switch the fan speed.
Keeps operating at the “LOW” speed quietly.
Keeps operating at the “MED” fan speed.
Keeps operating at the “MAX” fan speed. (The noise level will be louder)
Operates the unit at a higher fan speed for the first 10 minutes, and then at a lower and
higher fan speed at 20-minute intervals alternately to effectively eliminate pollens.
E-11
Operate
Stop
‡ :KHQHOLPLQDWLQJYLUXVHVDQGSROOHQV
brought home
‡ 'XULQJRUDIWHUYDFXXPFOHDQLQJ
‡ :KHQWDNLQJLQWKHODXQGU\KXQJRXWGRRUV
‡ :KHQTXLFNO\GHRGRUL]LQJOLIHVPHOO
‡ :KHQGHRGRUL]LQJFRRNLQJVPHOORURGRUV
from the laundry dried indoors
Humidify Indicator Light
Red
(Flashing)
Off
Green
Humidifying
Not humidifying *
Supply water
‡ :KHQZDWHULQWKH:DWHU7DQNUXQXPLGLI\,QGLFDWRU/LJKWEOLQNVLQUHGDQGVWDUWRSHUDWLRQ
without the humidifying function.
‡ :KHQWKH3ODVPDFOXVWHU,RQ
) is “OFF”, the unit will not discharge Plasmacluster ions but still
remove dust and odors by the air purifier's performance..
* When humidity reaches the optimal level, the unit stops humidifying air and the Humidify Indicator Light
turns OFF.
* When the unit starts operation in the Plasmacluster ion Shower mode while the Water Tank is empty,
the Humidify Indicator Light will not turn ON.
Select the preferred fan setting in the clean air & humidify mode or
clean air mode.
This setting is not available during operation in the Plasmacluster ion Shower mode.
Caution
AUTO
POLLEN
MAX
MED
LOW
ENGLISHENGLISH