Sharp Plasmacluster KC-30TX1, Руководство по эксплуатации

Страница: 36 / 76

Beep
OPERATION
Clean Air & Humidify Mode
Water tank
The operation in this mode is generally recommended. (Humidity setting cannot be adjusted.)
Beep ー
E-9
page
E-11
page
Humidify Indicator Light
Red
(Flashing)
Off
Green
Humidifying
Not humidifying *
Supply water
Caution
Room temperature Optimal humidity
Clean Air Mode
Suitable during rainy seasons or when the humidity is high. (operable without filling the Water Tank)
Beep
Beep ー
E-11
page
Off Not humidifying
Humidify Indicator Light
E-10
Insert the plug into
the outlet.
Supply water
Operate
Stop
Operate
Stop
Fill up the Water
Tank with tap
water
Select a preferred
fan speed
Select a preferred
fan speed
‡ :KHQRSHUDWLQJWKHXQLWIRUWKHILUVWWLPH
after the plug is inserted into the outlet, set
the fan speed to “AUTO” and
Plasmacluster ion to “ON”.
‡ )URPWKHVHFRQGWLPHRQZDUGVRSHUDWH
the unit with the same setting as the
previous one.
‡ :KHQRSHUDWLQJWKHXQLWIRUWKHILUVWWLPH
after the plug is inserted into the outlet, set
the fan speed to “AUTO” and
Plasmacluster ion to “ON”.
‡ )URPWKHVHFRQGWLPHRQZDUGVRSHUDWH
the unit with the same setting as the
previous one.
‡ :KHQZDWHULQWKH:DWHU7DQNUXQXPLGLI\,QGLFDWRU/LJKWEOLQNVLQUHGDQGVWDUWRSHUDWLRQ
without the humidifying function.
‡ :KHQWKHIDQVSHHGLVVHWWR³$872´WKHXQLWFRQWUROVWKHKXPLGLI\LQJOHYHOIRUWKHRSWLPL]HGKXPLGLW\
However, the humidity could be too high or too low depending on
WKHVL]HRUFRQGLWLRQRIWKHURRPLQZKLFKWKHXQLWLVLQVWDOOHG
If humidity is too low: Set the fan speed to “MAX” or “MED” for operation.
If humidity is too high: Operate the unit in the clean air mode.
* When the fan speed is set to “AUTO” or “POLLEN”, the unit stops
humidifying air when it reaches the optimal humidity level and
the Humidify Indicator Light turns OFF.