Sharp PGF267X - XGA DLP Projector, Руководство по эксплуатации

Страница: 56 / 70

52
Maintenance
Cleaning the projector
Ensure that you have unplugged the power
cord before cleaning the projector.
The cabinet as well as the operation panel is
made of plastic. Avoid using benzene or
thinner, as these can damage the fi nish on
the cabinet.
Do not use volatile agents such as
insecticides on the projector.
Do not attach rubber or plastic items to the
projector for long periods.
The effects of some of the agents in the
plastic may cause damage to the quality or
fi nish of the projector.
Wipe off dirt gently with a soft fl annel cloth.
When the dirt is hard to remove, soak a cloth
in a mild detergent diluted with water, wring
the cloth well and then wipe the projector.
Strong cleaning detergents may discolor,
warp or damage the coating on the projector.
Make sure to test on a small, inconspicuous
area on the projector before use.
Mild deter
ge
nt
Mild detergent diluted
with water
Thinner
Wax
■
■
■
■
■
Cleaning the lens
Use a commercially available blower to
remove dust. If necessary, gently wipe the
lens surface with lens cleaning paper (for
plastic lens only). Do not use any liquid type
cleaning agents, as they may wear off the
coating fi lm on the surface of the lens.
As the surface of the lens can easily get
damaged, be careful not to scrape or hit the
lens.
Caution
Do not use any glass cleaner to clean the lens.
Avoid touching the lens with your hands to
prevent fi ngerprints on or damage to the lens
surface. •
•
Cleaning the exhaust and intake vents
Use a vacuum cleaner to clean dust from the
exhaust vent and the intake vent.
Info
If you want to clean the air vents during
projector operation, ensure you press
STANDBY/ON on the projector or
STANDBY on the remote control and put the
projector into standby mode. After the
cooling fan has stopped, clean the vents.
•
■
■
■