Sharp PGF267X - XGA DLP Projector, Руководство по эксплуатации

Страница: 34 / 70

30
Image Projection (Continued)
Switching the Input Mode
Select the appropriate input mode for the
connected equipment.
Press COMPUTER , DVI , S-VIDEO or
VIDEO on the remote control to select
the input mode.
When you press INPUT on the projector or DVI
on the remote control, the INPUT list appears.
Press
P
/
R
to switch the INPUT mode.
Adjusting the Volume
Press VOL + / – on the remote control
or –
O
/
Q
+ on the projector to adjust
the volume.
Pressing VOL–/–
O
will lower the volume.
Pressing VOL+/
Q
+ will raise the volume.
When the projector is connected to external
equipment, the volume level of the external
equipment changes in accordance with the
volume level of the projector. Set the projector's
volume to the lowest level when turning the
projector on/off or when changing the input
signal.
When you do not want to output the sound
from the projector's speaker while the
projector is connected to external equipment,
set “Speaker” in “PRJ-ADJ” menu to “Off”.
(See page
46 .)
•
•
•
•
Note
Displaying the Black Screen
and Turning Off the Sound
Temporarily
Press AV MUTE on the remote control
to temporarily display a black screen
and turn off the sound.
Pressing AV MUTE again will turn the
projected image back on.
•
Note
•
VOL +/– (Volume)
buttons
COMPUTER, DVI,
S-VIDEO, VIDEO
buttons
AV MUTE button
VOL +/– (Volume)
buttons
COMPUTER, DVI,
S-VIDEO, VIDEO
buttons
AV MUTE button
On-screen display On-screen display
On-screen display On-screen display