17
Quick Start
1
After the projector turns on, the Setup Guide appears.
(When “Setup Guide” is set to “On”. See page
45
.)
2
Follow the steps in the Setup Guide and adjust the focus and height (angle).
3
After adjusting the focus and height (angle), press
ENTER
to fi nish the Setup Guide.
4. Adjust the projected image with the Setup Guide
_
PP. 27, 28
Correcting trapezoidal distortion using Keystone Correction.
On the projector
On the remote control
Shrinks
upper side.
Shrinks
lower side.
5. Correct trapezoidal distortion
_
P. 29
Select the “COMPUTER” using
INPUT
on the projector or
COMPUTER
on the remote
control.
On the
projector
On the remote
control
INPUT list
INPUT
COMPUTER
DVI-D Computer
D
DVI-D Video
D
On-screen display (RGB)
RGB
1024
×
768
COMPUTER
When you press
INPUT
on the projector, the INPUT list appears.
Press
'
/
"
to switch the INPUT mode.
•
6. Select the INPUT mode
_
P. 30
7. Turn the computer on
Press
STANDBY/ON
on the projector or
STANDBY
on the remote control, and then press
the button again while the confi rmation message is displayed to put the projector into
standby mode.
On-screen display
On the
projector
On the remote
control
8. Turn the power off
_
P. 26
Содержание PGF267X - XGA DLP Projector
Страница 70: ......
