Sharp PC-TN1 Series, Руководство по эксплуатации

Страница: 65 / 142

4-8
4
•
Note that Power schemes includes other power management settings
(such as a timer for System standby, etc.) appearing on Power Schemes
tab. Confirm those settings are set to the appropriate value when you
select the processor performance using power schemes facility.
•
You can set your own power scheme. Set all power management
settings to your suitable ones, and click
Save as… ; then, type an
appropriate name and click OK .
• Once the preinstalled power scheme settings listed on the previous
page are deleted, there is no way but re-installation to resume them.
Using System Standby/Hibernate
System standby/hibernate is a very useful power management tool. For example, you
can restart your computer from stand by mode more quickly than shut down mode.
When your computer resumes from
System standby/hibernate , the system restores the
exact last state of your computer. On Windows, you can set the conditions under which
the system enters
System standby or System hibernate .
•
System standby stores the current condition of your computer in RAM and stops
power supply to all but a few essential components. Your system enters and resumes
from
System standby per the conditions mentioned later. In System standby , the
power indicator blinks green. To resume from System standby , operate your
computer again.
•
System hibernate saves the current condition of your computer in part of the hard
disk and turns off your computer. Your system enters and resumes from System
hibernate per the conditions mentioned later. In System hibernate the power
indicator is off. To resume from System hibernate , slide the power switch.
When entering/resuming from System standby/hibernate , follow the
instructions below:
• Finish communications, printing, and playing music or video before
entering
System standby/hibernate .
•
Do not operate your computer or peripheral devices, or
connect/disconnect peripheral devices, while entering/resuming from
System standby/hibernate.
•
While operating on battery that does not have enough power, your
computer may not resume from
System standby/hibernate . In this case,
connect the AC adapter to your computer.
•
Save your data before your computer enters System standby . If the
power supply to your computer is stopped, the RAM contents will be
lost.
• Select your user account if Windows requires when your computer has
resumed from
System standby/hibernate .