Sharp PC-TN1 Series, Руководство по эксплуатации

Страница: 108 / 142

7-5
7
Device Configuration enables or disables built-in devices such as USB, audio system,
modem, LAN, PC card, IEEE1394 and Wireless LAN.
Supervisor and User Password
Setting a password will protect your computer against unauthorized access. Once a
password is set, the system requires the password when entering to the Setup Utility.
And if
Password on boot is enabled, the system will require a password when the
computer is turned on.
If you enter a wrong password three times, the message System Disabled
appears. Shut down your computer with the power switch and after 10
seconds, slide it to turn on your computer again.
Your computer supports two different levels of password security: Supervisor
password and User password. You cannot set a user password unless you have set a
supervisor password. If you share the computer with others, we recommend that you
set both the supervisor and the user password, and let others know the user password
only.
If you type the user password when you enter the Setup Utility, you can change
System
Time and System Date of the Main menu, Resolution Expansion of the Advanced menu
and Set User Password of the Security menu only.
Setting Password
1. In the Security menu of the Setup Utility, select Set Supervisor Password or Set
User Password and press Enter .
2. Type your password (up to eight characters), and press Enter .
3. Type the same password again, and press Enter twice.
4. Select Exit menu and confirm Exit Saving Changes is highlighted; then press
Enter .
5. Confirm Ye s is highlighted and press Enter . The system restarts.
Changing Password
1. In the Security menu of the Setup Utility, select Set Supervisor Password or Set
User Password and press Enter .
2. Type your current password, and press Enter .
3. Type your new password, and press Enter .
4. Type your new password again, and press Enter twice.