Sharp Notevision PG-M17X, Руководство по эксплуатации

Страница: 33 / 37

30
E
nglish
+
4 Adjust the Focus Ring on the projector lens.
4 Make sure the projection screen is between the required distance
3.74ft.(1.14m)~ 39.37ft.(12m) from the projector.
+! -3+5
>
The projector itself will automatically detect 16:9 DVD and adjust the
aspect ratio by digitization to full screen with 4:3 default setting.
If the projector is still outstretched, you will also need to adjust the
aspect ratio by referring to the following:
4 Please select 4:3 aspect ratio type on your DVD player if you are
playing a 16:9 DVD.
4 If you can’t select 4:3 aspect ratio type on your DVD player, please
select 4:3 On Screen-Display(OSD) function of the projector for
your display.
+#
4 To open “Menu” then select “Management” to adjust the
projection.
+8 &
4
When the lamp reaches its end of life, it will burn out and may
make a loud popping sound. If this happens, the projector will not
turn back on until the lamp module has been replaced. To replace
the lamp, please contact Sharp Authorized Projector Dealer or
Service Center.
+%
4 After projector is disconnected with the Power Cord longtime
and when you connect the Power Cord again, the “TEMP”
indicator may flash seldom and buttons may not be functional.
In such case please try to power on after 2 minutes.
+% !>
4 DTV signal may result slight deviation in aspect ratio depending
upon the signal type.
Appendices
Downloaded from: http://www.usersmanualguide.com/