background image

ii

IMPORTANT

• For your assistance in reporting the loss 

or theft of your Projector, please record 
the Model and Serial Number located on 
the bottom of the projector and retain this 
information.

• Before recycling the packag ing, please 

ensure that you have checked the con-
tents of the carton thoroughly against the 
list of “Supplied accessories” on page 

11

.

Model No.:

Serial No.:

The supplied CD-ROM contains operation instructions in English, French, Spanish and 
Portuguese. Carefully read through the operation instructions before operating the projector.

Le CD-ROM fourni contient les instructions de fonctionnement en anglais, français, espagnol 
et portugais. Veuillez lire attentivement ces instructions avant de faire fonctionner le projecteur.

El CD-ROM suministrado contiene instrucciones de operación en inglés, francés, español y 
portugués. Lea cuidadosamente las instrucciones de operación antes de utilizar el proyector.

O CD-ROM fornecido contém instruções de operação em Inglês, Francês, Espanhol e 
Português. Leia cuidadosamente todas as instruções de operação antes de operar o projetor.

Содержание Notevision PG-D2510X













































































Отзывы: