Sharp MX-M200D Скачать руководство пользователя

Страница: 35 / 92

TROUBLESHOOTING AND MAINTENANCE

Misfeed in C

Lower (1) in the illustration, open the
fusing unit paper guide, and remove
the misfed paper.

Be careful not to tear the misfed
paper during removal.

If the misfed paper cannot be removed
by the previous step, remove it from
the paper output area.

Be careful not to tear the misfed
paper during removal.

Close the side cover.

The message "

Clear paper

path." will be cleared and
copying will be possible.

MISFEED IN TRAY 1

Pull out tray 1 and remove the misfed
paper.

Be careful not to tear the misfed
paper during removal.

Open and close the side cover.

The message "

Clear paper

path." will be cleared and
copying will be possible.

Gently push tray 1 into the machine.

Push the tray in completely.

The fusing unit is hot. Do not touch
the fusing unit when removing
misfed paper. Doing so may cause a
burn or injury.

(1)

Warning

• When closing the side cover, hold the

handle.

• If the paper was torn, make sure that no

torn pieces remain in the machine.

• If the message does not clear, check

again to make sure that no pieces of
paper remain.

Note

Make sure that there is no misfed paper in the tray before pulling it out. (Page 31)

Note

• When closing the side cover, hold the

handle.

• If the message does not clear, check

again to make sure that no pieces of
paper remain.

Note

Pegasus-E_Copy_Sec.book 33 ページ２００９年６月４日　木曜日　午前１１時０分

Содержание MX-M200D





























































































Результаты поиска

Содержание MX-M200D

Отзывы:

Похожие инструкции для MX-M200D

Бренды по названию

Популярные бренды

Sharp MX-M200D, Руководство по эксплуатации

Результаты поиска

Содержание MX-M200D

Отзывы:

Похожие инструкции для MX-M200D

Бренды по названию

Популярные бренды