Sharp MX-M200D Скачать руководство пользователя

Страница: 33 / 92

TROUBLESHOOTING AND MAINTENANCE

MISFEED IN THE MACHINE

To remove a paper misfeed from the machine, the bypass tray and then the side cover must be opened. Check
whether the misfeed occurred in A, B, or C below and then follow the misfeed removal procedure for that location.

Open the bypass tray and then the
side cover.

Determine where the misfeed
occurred.

Misfeed in A

Open the front cover.

Push gently on both ends of the
front cover to open it.

Turn the roller rotating knob in the
direction of the arrow to remove the
misfed paper.

Be careful not to tear the misfed
paper during removal.

Close the front cover and the side
cover.

The message "

Clear paper

path." will be cleared and
copying will be possible.

Location B

If paper is misfed here, go to
"Misfeed in B" (page 32).

Location C

If paper is misfed here, go to "Misfeed in C"
(page 33).

Location A

If paper is misfed here, go to "Misfeed in A"
(below).

The fusing unit is hot. Do not touch
the fusing unit when removing
misfed paper. Doing so may cause a
burn or injury.

Do not touch the photoconductive drum
(green portion) when removing the misfed
paper. Doing so may damage the drum and
cause smudges on copies.

Roller rotating
knob

Warning

Caution

• When closing the front cover, gently hold

both ends.

• When closing the side cover, hold the

handle.

• If the message does not clear, check

again to make sure that no pieces of
paper remain.

Note

Pegasus-E_Copy_Sec.book 31 ページ２００９年６月４日　木曜日　午前１１時０分

Содержание MX-M200D





























































































Результаты поиска

Содержание MX-M200D

Отзывы:

Похожие инструкции для MX-M200D

Бренды по названию

Популярные бренды

Sharp MX-M200D, Руководство по эксплуатации

Результаты поиска

Содержание MX-M200D

Отзывы:

Похожие инструкции для MX-M200D

Бренды по названию

Популярные бренды