manualshive.com logo in svg

Sharp MX-M160, Руководство по обслуживанию, Страница: 66 / 121

Поделиться
Скачать
Sharp MX-M160 Скачать руководство пользователя страница 66

MX-M200D SIMULATIONS 7-37

48

01

Main/sub scanning magnification ratio adjustment

Used to adjust the magnification ratio in the main scanning (front/rear) direction and the sub scanning 
direction.
When this simulation is executed, the selection window of the adjustment items and the current set value 
are displayed

The adjustment value is in the range of 1 - 99.
When the adjustment value is increased by 1, the ratio is increased by 0.1%.
Select an adjustment item (mode) with the arrow keys and enter a desired value with numeric keys.
When [OK] key is pressed, the entered value is saved to the EEPROM and the machine shifts to the copy 
execution window.
After completion of copying, the machine returns to the adjustment value input window.
When [START] key is pressed instead of [OK] key, the machine shifts to the copy execution window and 
performs copying.

Default:
F-R: 50
SCAN: 50

05

SPF/RSPF mode sub scanning magnification ratio adjustment in copying

Used to adjust the sub scanning magnification ratio in the SPF/RSPF mode.
When this simulation is executed, the selection window of the adjustment items and the current set value 
are displayed.

The adjustment value is in the range of 1 - 99. When the adjustment value is increased by 1, the ratio is 
increased by 0.1%.

Select an adjustment item (mode) with the arrow keys and enter a desired value with numeric keys.
When [OK] key is pressed, the entered value is saved to the EEPROM and the machine shifts to the copy 
execution window.
After completion of copying, the machine returns to the adjustment value input window.
When [START] key is pressed instead of [OK] key, the machine shifts to the copy execution window and 
performs copying. 
To adjust the sub scanning magnification ratio on the back of the document, shift the window to the copy 
start window and select "Duplex 

 Simplex" or "Duplex 

 Duplex" mode with the [DUPLEX] key.

* The exposure mode is fixed to "TEXT" with density 3, and cannot be changed.
*  For the model without RSPF, the adjustment item of document back is not displayed. 

(Only when the 
SPF/RSPF is 
installed.)
Default:
RSPF(SIDE1): 50
RSPF(SIDE2): 50

Main 
code

Sub 

code

Contents

Remark

Sim48-1 COPY MAG.

1:F-R
2:SCAN

     [      1-  99]

50

50

50

(Adjustment item selection window)

Display text array

: Adjustment mode

1: F-R

: Main scan direction magnification ratio (OC/SPF/RSPF)

2: SCAN

: Sub scan direction magnification ratio (OC)

Ready to copy.

S

100%

8 1/2

11

(Copy start window)

Copies in progress.

S

100%

8 1/2

11

(Copy execution window)

Adjustment

item selection

window

Copy start

window

Copy execution

window

End of copy execution

[BACK] key

[START] key

[START] key

[OK] key

Sim48-5 (R)SPF ZOOM

1:RSPF(SIDE1)
2:RSPF(SIDE2)

     [      1-  99]

50

50

50

(Adjustment item selection window)

Display text array : Adjustment mode
1: RSPF (SIDE1) : SPF/RSPF sub scan direction magnification

ratio adjustment on the front of document 

2: RSPF (SIDE2) : RSPF sub scan direction magnification ratio

setting on the back of document

Ready to copy.

S

100%

8 1/2

11

(Copy start window)

Copies in progress.

S

100%

8 1/2

11

(Copy execution window)

Adjustment

item selection

window

Copy start

window

Copy execution

window

End of copy execution

[BACK] key

[START] key

[START] key

[OK] key

Содержание MX-M160


























































































































Отзывы:

Нет отзывов