manualshive.com logo in svg

Sharp MX-FXX1, Руководство пользователя

Поделиться
Скачать
Sharp MX-FXX1 Скачать руководство пользователя страница 182

181

Distinctive Ring Detection

This Setting can only be activated in Canada, Australia, 
and New Zealand.
If multiple telephone numbers have been assigned to 
your telephone line, the number called can be identified 
by its ringing pattern. By using one number for voice 
calls and another number for faxes, you can tell which 
type of call you are receiving by the ringing pattern. You 
can set your machine to automatically receive faxes 
when your fax number is called by setting the pattern 
that corresponds to your fax number. (Note that in 
Canada, six selections are available.) 
To use this setting, touch the key of the desired pattern 
and touch the [OK] key.

PBX Setting

This Setting can only be activated in France, Germany.
When the machine is used on a PBX, you can enable 
the PBX setting to have the machine automatically 
connect to the outside line. When this setting is enabled, 
the [R] key appears in the base screen. When the [R] 
key is touched, the PBX setting is temporarily cancelled.
To enable the PBX setting, select the [PBX Connection] 
checkbox 

 and specify the method for connecting to 

the outside line.
If your PBX uses the Flash method to connect to the outside 
line, touch the [Flash] key and then touch the [OK] key.
If your PBX uses an ID number to connect to the outside 
line, touch the [ID] key, specify the ID number with the 

 keys, and touch the [OK] key.

Fax Send Settings

The fax send settings are used to enable or disable certain fax functions to better suit the needs of your workplace.
Touch the [Image Send Settings] key, the [Fax Settings] key, and then the [Fax Send Settings] key to configure the settings.

Auto Reduction Sending Setting

This setting is used to have the size of transmitted faxes 
automatically reduced to match the size of the paper in 
the receiving machine.
If the setting is disabled, faxes are sent at full size. 
Because the size is not adjusted to match the size of the 
printing paper, part of the received fax may be cut off.
To enable this setting, select the checkbox 

 and 

touch the [OK] key.

Rotation Sending Setting

When transmitting an image that is one of the following 
sizes, this function rotates the image counterclockwise 
90 degrees.
A4, B5R, A5R, 8-1/2" x 11", 5-1/2" x 8-1/2"R, 16K
To use this setting, select the checkboxes 

 of the

desired sizes and touch the [OK] key.

Quick On Line Sending

When this setting is enabled, the machine starts transmitting a fax 
as soon as the first page is scanned. Transmission takes place at 
the same time as the remaining pages are being scanned.
If you disable this setting, transmission will not begin 
until all pages have been scanned. Note that this setting 
does not apply to manual transmission.
To enable this setting, select the checkbox 

 and 

touch the [OK] key.

Printing Page Number at Receiver

This setting is used to add the page number to the top of 
each fax page printed by the receiving machine.
To enable this setting, select the checkbox 

 and 

touch the [OK] key.

Date/Own Number Print Position 
Setting

This setting determines the position of the date and sender 
information printed at the top of faxes by the receiving 
machine. To have the information printed outside the 
transmitted document image, touch the [Outside the 
Original Image] key. To have the information printed inside 
the document image, touch [Inside the Original Image] key.

Enter a number for the first digit and then a number or 
a hyphen "-" for the second and third digits.

A4R and 8-1/2" x 11"R size images are not rotated.

Содержание MX-FXX1

































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды