manualshive.com logo in svg

Sharp MX-B350W, Руководство пользователя

MX-B350W - многофункциональное устройство от Sharp, комбинирующее печать, сканирование и копирование. Идеально подходит для небольших офисов и домашнего использования. Скачайте бесплатно Руководство пользователя на manualshive.com, чтобы настроить и использовать устройство максимально эффективно.

Поделиться
Скачать
background image

6. Limited Warranty on Media.

SHARP warrants the disks on which the Software is recorded to be free from defects in materials and workmanship 
under normal use for a period of ninety (90) days from the date of purchase as evidenced by a copy of the receipt.  
The entire liability of SHARP and/or its Licensors and your exclusive remedy will be replacement of the disk which 
fails to meet the limited warranty provided by this Clause 6.  A disk will be replaced when it is returned to SHARP or a 
SHARP authorized representative with a copy of the receipt.  SHARP will have no responsibility to replace a disk 
damaged by accident, abuse or misapplication.
ANY IMPLIED WARRANTIES ON THE DISKS, INCLUDING THE IMPLIED WARRANTIES OF MERCHANTABILITY 
AND FITNESS FOR A PARTICULAR PURPOSE, ARE LIMITED IN DURATION TO NINETY (90) DAYS FROM THE 
DATE OF DELIVERY.  THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY ALSO HAVE 
OTHER RIGHTS WHICH VARY FROM JURISDICTION TO JURISDICTION.

7. Disclaimer of Warranty on Software

You expressly acknowledge and agree that use of the Software is at your sole risk. The Software and related 
documentation are provided "AS IS" and without warranty of any kind and SHARP and SHARP's Licensor(s) (for the 
purpose of provisions 6 and 7, SHARP and SHARP's Licensor(s) shall be collectively referred to as "SHARP") 
EXPRESSLY DISCLAIM ALL WARRANTIES, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE 
IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. SHARP DOES 
NOT WARRANT THAT THE FUNCTIONS CONTAINED IN THE SOFTWARE WILL MEET YOUR REQUIREMENTS, 
OR THAT THE OPERATION OF THE SOFTWARE WILL BE UNINTERRUPTED OR ERROR-FREE, OR THAT 
DEFECTS IN THE SOFTWARE WILL BE CORRECTED. FURTHERMORE, SHARP DOES NOT WARRANT OR 
MAKE ANY REPRESENTATIONS REGARDING THE USE OR THE RESULTS OF THE USE OF THE SOFTWARE 
OR RELATED DOCUMENTATION IN TERMS OF THEIR CORRECTNESS, ACCURACY, RELIABILITY, OR 
OTHERWISE. NO ORAL OR WRITTEN INFORMATION OR ADVICE GIVEN BY SHARP OR A SHARP 
AUTHORIZED REPRESENTATIVE SHALL CREATE A WARRANTY OR IN ANY WAY INCREASE THE SCOPE OF 
THIS WARRANTY. SHOULD THE SOFTWARE PROVE DEFECTIVE, YOU (AND NOT SHARP OR A SHARP 
AUTHORIZED REPRESENTATIVE) ASSUME THE ENTIRE COST OF ALL NECESSARY SERVICING, REPAIR OR 
CORRECTION, SOME JURISDICTIONS DO NOT ALLOW THE EXCLUSION OF IMPLIED WARRANTIES, SO THE 
ABOVE EXCLUSION MAY NOT APPLY TO YOU.

8. Limitation of Liability

UNDER NO CIRCUMSTANCES INCLUDING NEGLIGENCE, SHALL SHARP BE LIABLE FOR ANY INCIDENTAL, 
SPECIAL OR CONSEQUENTIAL DAMAGES THAT RESULT FROM THE USE OR INABILITY TO USE THE 
SOFTWARE OR RELATED DOCUMENTATION, EVEN IF SHARP OR A SHARP AUTHORIZED 
REPRESENTATIVE HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. SOME JURISDICTIONS 
DO NOT ALLOW THE LIMITATION OR EXCLUSION OF LIABILITY FOR INCIDENTAL OR CONSEQUENTIAL 
DAMAGES SO THE ABOVE LIMITATION OR EXCLUSION MAY NOT APPLY TO YOU. 
 In no event shall SHARP's total liability to you for all damages, losses, and causes of action (whether in contract, tort 
(including negligence) or otherwise) exceed the amount paid by you for the Software.

9. Controlling Law and Severability

For a portion of the Software related with Apple Macintosh and Microsoft Windows, this license shall be governed by 
and construed in accordance with the laws of the state of California and Washington, respectively. If for any reason a 
court of competent jurisdiction finds any provision of this License, or portion thereof, to be unenforceable, that 
provision of the License shall be enforced to the maximum extent permissible so as to effect the intent of the parties, 
and the remainder of this License shall continue in full force and effect. 

10. Complete Agreement

This License constitutes the entire agreement between the parties with respect to the use of the Software and 
related documentation, and supersedes all prior or contemporaneous understandings or agreements, written or oral, 
regarding such subject matter. No amendment to or modification of this License will be binding unless in writing and 
signed by a duly authorized representative of SHARP.

Содержание MX-B350W



















































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для MX-B350W

Panasonic Panafax UF-7000 Network Connection preview
Panafax UF-7000
Бренд: Panasonic Страницы: 28
Panasonic KX-PS8000 Setup Manual preview
KX-PS8000
Бренд: Panasonic Страницы: 68
Panasonic KX-MC6020 Instrucciones De Funcionamiento preview
KX-MC6020
Бренд: Panasonic Страницы: 120
Panasonic Workio DP-C262 Operating Instructions Manual preview
Workio DP-C262
Бренд: Panasonic Страницы: 100
Panasonic KX-MB781 - B/W Laser - All-in-One Instrucciones De Funcionamiento preview
KX-MB781 - B/W Laser - All-in-One
Бренд: Panasonic Страницы: 96
Panasonic Workio DP-6010 Operating Instructions Manual preview
Workio DP-6010
Бренд: Panasonic Страницы: 130
Oki 10i Maintenance Manual preview
10i
Бренд: Oki Страницы: 210
Panasonic FP-D355 User Manual preview
FP-D355
Бренд: Panasonic Страницы: 77
Panasonic FP-7818 Service Manual & Parts Manual preview
FP-7818
Бренд: Panasonic Страницы: 402
Panasonic DP-8020E Quick Manual preview
DP-8020E
Бренд: Panasonic Страницы: 54
Panasonic Workio DP-8016P Operating Instructions Manual preview
Workio DP-8016P
Бренд: Panasonic Страницы: 88
Panasonic DP-1510P Operating Instructions Manual preview
DP-1510P
Бренд: Panasonic Страницы: 60
Chamjin I&C CJ50SP User Manual preview
CJ50SP
Бренд: Chamjin I&C Страницы: 21
Xerox WorkCentre 7655 Evaluator Manual preview
WorkCentre 7655
Бренд: Xerox Страницы: 24
Xerox EC8056 Getting Started preview
EC8056
Бренд: Xerox Страницы: 13
Oki C831dn Safety And Warranty Manual preview
C831dn
Бренд: Oki Страницы: 48
Xerox WorkCentre 7200 series Specifications preview
WorkCentre 7200 series
Бренд: Xerox Страницы: 12
Lexmark C53x Clearing Jams Manual preview
C53x
Бренд: Lexmark Страницы: 6

Бренды по названию

Популярные бренды

Загрузить еще бренды