Sharp MD-MT877 страница 12 Скачать руководство пользователя

Страница: 12 / 56

MD-MT877/MD-MT877C

– 12 –

Entering the TEST mode

1. Setting at port (in standby state, disc-free state or power

nonconnected state)

(1) Set the port as follows.
TEST1 : "Low"
TEST0 : "High"
(2) Press the PLAY button in the standby state (it is allowed to

close the disc lid or to connect the power supply).

(3) Test Mode STOP [ T E S T _ ]

1 High reflection disc

MMD-110

88GMMD-110

(TEAC Test MD)

2 Low reflection disc

MMD-213A

88GMMD-213A

(TEAC Test MD)

3 Low reflection disc

Recording

UDSKM0001AFZZ

minidisc disc

ADJUSTMENT

Test disc

MD adjustment needs two types of disc, namely record-
ing disc (low reflection disc) and playback-only disc (high
reflection disc).

Type

Test disc

Parts No.

Note: Use the low reflection disc on which music has been

recorded.

1. AUTO 1 Mode

• Perform preliminary automatic adjustment.
• If the combination of mechanism and pickup
PWB has been changed, be sure to start from

AUTO1.

2. AUTO 2 Mode

• Perform ATT (attenuator) automatic adjustment.
• Perform continuous playback (error rate display,
jump test)

3. TEST-PLAY Mode

• Continuous playback from the specified address
is performed.
• 1 line, 10 lines or 100 steps manual jump is

performed.

• C1 error rate display (pit section), ADIP error

rate display (groove section)

• The temperature correction is performed only when

servo start is performed, but the posture correction
is not performed during continuous playback.

4. TEST-REC Mode

• Continuous record from the specified address

is performed.

• Change of record laser output (servo gain is

also changed according to laser output).

• The temperature correction is performed only

when servo start is performed, but the posture
correction is not performed during continuous
recording.

5. MANUAL 1 Mode

• Temperature is displayed.
• Seeing the displayed adjustment value, perform
preliminary manual adjustment.
(Error rate indication, jump test)

6. MANUAL 2 Mode

• Temperature is displayed.
• Seeing the displayed adjustment value, perform
ATT (attenuator) manual adjustment.
• Continuous playback is performed
(error rate display, jump test).

7. ERROR INFORMATION

• Error information is displayed.

Mode

• Error information is initialized

8. NORMAL Mode

• The mode is changed from the TEST mode to

the normal mode without adjustment.

• In the normal mode the internal operation mode,

memory capacity, etc. areindicated.

• In the normal mode both temperature correction

and posture correction are performed.

9. EEPROM Mode

• Factors of digital servo are changed manually.
• Cut-off frequency of BASS1, BASS2 and BASS3

is selected manually.

• Temperature detection terminal voltage is

measured, and the reference value is set.

• Defaults are selected and set.
• Setting of EEPROM protect area is updated.

2. Setting by special button operation (in standby state)

Test mode: Perform it with the remote control.
(1) Press and hold the "PLAY MODE" button on the remote control

and press the "PLAY" button.

(2) Release only the "PLAY MODE" button.
(3) Press and hold only the "PLAY" button and press the "VOL-

UME–" button.

(4) Normal mode setting initialization (BASS setting, VOLUME

setting, etc.)

(5) Test Mode STOP [ T E S T _ ]
(6) Press "" to check the microcomputer version.
(7) Press "VOLUME–" to light up all the LCDs.

Leaving the TEST mode

(1) Press the STOP button in the TEST mode stop state or version

indicating state or whole LCD lighting state.

(2) EEPROM rewrite-enable area updating.
(3) Change to standby state

Shipping setting method

(1) Insert the rechargeable battery. Do not close the compartment.
(2) Close the battery lid twice in succession while pressing the

VOLUME– button and the PLAY button on the main unit at the
same time. (Turn on and off the power twice)

(3) Make sure the display changes from [INIT] to [BYE OK].

Test Mode

Содержание MD-MT877

























































Результаты поиска

Содержание MD-MT877

Отзывы:

Похожие инструкции для MD-MT877

Бренды по названию

Популярные бренды

Sharp MD-MT877, Руководство по обслуживанию

Результаты поиска

Содержание MD-MT877

Отзывы:

Похожие инструкции для MD-MT877

Бренды по названию

Популярные бренды