Sharp MD-MT877, Руководство по обслуживанию

Страница: 13 / 56

MD-MT877/MD-MT877C
– 13 –
Operation in each TEST mode
1. AUTO1 Mode
• When the STOP button is pressed while the AUTO1 menu appears
or during automatic adjustment, the mode changes to the TEST
mode stop state. At this time the adjustment value is not output.
• Be sure to adjust, using the specified disc MMD-213A.
• Adjustment NG; Adjustment item out of range, focus ON failure, and
adjustment error
• When the PLAY button is pressed while ADJ. OK is displayed, AU-
TO2 is executed.
2. AUTO2 Mode
• When the STOP button is pressed while the AUTO2 menu appears
or during automatic adjustment, the mode changes to the TEST
mode stop state. At this time the adjustment value is not output.
• Adjustment NG; Adjustment item out of range, and adjustment error.
• When the PLAY button is pressed while ADJ. OK is displayed, TEST
_PLAY is executed.
3. MANUAL1 Mode
• Adjustment item to be made in AUTO1 mode is performed manually.
• When the button is pressed during adjustment, the sett-
ing increases, and the new setting is output.
• When the VOLUME– button is pressed during adjustment, the sett-
ing decreases and the new setting is output.
• If the /– button is held down, the setting changes continu-
ously with 100 ms cycle.
*In this operation, the setting change is performed for each digit. The
digit is changed by pressing the MODE button.
• If the setting is within the allowable range, the RANDOM display
lights.
• When the STOP button is pressed during MANUAL1 menu or mea-
surement or adjustment, the state is changed to the TEST mode
stop state.
4. MANUAL2 Mode
• Adjustment item to be made in AUTO2 mode is performed manually.
• When the button is pressed during adjustment, the sett-
ing increases, and the new setting is output.
• When the VOLUME– button is pressed during adjustment, the sett-
ing decreases and the new setting is output.
• If the /– button is held down, the setting changes continu-
ously with 100 ms cycle.
*In this operation, the setting change is performed for each digit. The
digit is changed by pressing the MODE button.
• If the setting is within the allowable range, the RANDOM display
lights.
• When the STOP button is pressed during MANUAL2 menu or mea-
surement or adjustment, the state is changed to the TEST mode
stop state.
• When the PLAY button is pressed in B-ATT set state, the mode is
changed to the continuous playback mode.
• As for operation during continuous playback refer to "TEST-PLAY
mode explanation".
5. TEST-PLAY Mode
• When the STOP button is pressed while the TEST-PLAY menu
appears, or in TEST-PLAY or continuous playback mode, the mode
changes to the TEST mode stop state.
• When the PLAY button is pressed while the TEST-PLAY menu
appears, continuous playback is initiated from the current pickup
position.
• Whenever the DISP button is pressed in the TEST-PLAY menu, the
target address changes as follows.
0032 — 03C0 — 0700 — 08A0 — 0950— 0032 —
When the PLAY button is pressed while a target address is dis-
played, continuous playback is performed after searching that
address.
• Each time the MODE button is pressed while the TEST-PLAY mode
target address is displayed, the digit which is changed by pressing
the FAST FORWARD/REVERSE button is changed as follows.
0032 — 0032 — 0032 — 0032 —
• When the FAST FORWARD button is pressed in the TEST-PLAY
mode target address is displayed, the digit of address specified by
the MODE button is set to +1h. (0 to F)
• When the FAST REVERSE button is pressed in the TEST-PLAY
mode target address is displayed, the digit of address specified by
the MODE button is set to -1h. (0 to F)
* When the FAST FORWARD/REVERSE button is held down, the
setting changes continuously, one cycle being 100 ms.
• When the BASS button is pressed in the continuous playback mode,
the number of jump lines changes as follows.
1 — 10 — 100 step — 1
* After the number of jump lines is indicated for one second, the
address indication is restored. [ T R ] or [ 100 stp ]
• When the FAST FORWARD button is pressed in the continuous
playback mode, the specified number of lines is jumped in the FWD
direction.
• When the FAST REVERSE button is pressed in the continuous
playback mode, the specified number of lines is jumped in the REV
direction.
* When the FAST FORWARD/REVERSE button is held down, jump
is repeated every approx. 100 ms.
• Whenever the DISP button is pressed in the continuous playback
mode, the indication changes as follows.
* Pre-mastered disc
Continuous playback [ S Q ]
(SUBQ address indication)
|
Continuous playback [ C E ]
(C1 error indication)
|
Continuous playback [ S Q ]
(SUBQ address indication)
* Recordabl disk
Continuous playback [ A P ]
(ADIP address indication)
|
Continuous playback [ C E ]
(C1 error indication)
|
Continuous playback [ A E ]
(ADIP error indication)
|
Continuous playback [ A P ]
(ADIP address indication)