Sharp MD-MT821(GL) Скачать руководство пользователя страница 7

Страница: 7 / 52

MD-MT821/W

– 7 –

●

The battery run down.

●

Nothing is recorded.

●

No copy can be made because of the

SCMS copyright system.

●

A track cannot be edited.

●

Recording cannot be performed

correctly due to vibration or shock in

the unit.

●

Editing is impossible.

●

The disc is scratched.

●

Poor connection of the digital cable.

●

The disc is out of recording space.

●

The unit is in the hold mode.

●

The EJECT lever was moved during

recording or editing.

●

A disc has not been loaded.

●

ou tr

ied to record on a pla

ybac

k- only

disc.

●

Improper power is being supplied.

●

The MD is write protected.

●

ou tried to record without loading an

MD.

●

A playback-only MD was loaded and

the REC button was pressed when the

wer w

as off

●

The disc is damaged.

●

Since a track number is currently being

located or written to, the unit cannot

accept your command.

●

ou ha

come to the conclusion that

the unit is out of order

●

The temperature is too high.

●

A large portion of the disc has been

damaged.

●

There is no space left for recording

character information (track names,

disc names, etc.).

●

The track has been protected from

being erased.

●

A large portion of the disc has been

damaged.

●

There is an error in the recorded signal.

●

A disc which contains data other than

music was played.

●

There is an error in the signal from the

disc.

●

Charge the rechargeable battery or

replace the alkaline battery (or use the

AC adaptor for power).

●

Replace the disc with a recorded disc.

●

Record using the analog cable.

●

Change the stop position of the track

and then try editing it.

●

Re-record or replace it with another

recordable disc.

●

Check the number of tracks.

●

If the sound you hear is not right, try

recording again.

●

Replace the disc with another

recordable disc.

●

Connect the digital cab

le securely

●

Replace it with another recordable disc.

●

Return the HOLD switch to its original

position.

●

off the po

er and remov

e the

MiniDisc.

●

Load a disc.

●

Replace it with a recordable disc.

●

Use one of the specified power

sources.

●

Move the write protection knob back to

its original position.

●

Load a recordable MD.

●

Replace it with a recordable MD.

●

Reload the disc or replace it.

●

Replace it with another recorded disc.

●

ait f

or a while and tr

y the oper

ation

again.

●

it repaired, go to the distrib

utor

where you purchased the unit.

●

off the pow

, and wait f

or a while

●

Replace it with another recorded disc.

●

Replace it with another recordable disc.

●

Edit the track with the device on which

it was recorded.

●

Replace it with another recorded disc.

●

Erase all of the signal errors, and then

try recording again.

●

A disc which contains non-music data

cannot be played.

●

Replace it with another recorded disc.

ERROR MESSAGES

( ): Error messages seen on the remote control.

Error messages

Remedy

TT EMPTY

(Lo B

TT)

BLANK DISC

(BLANK)

Can’t COPY

(Not REC)

Can’t EDIT

Can’t REC

(Not REC)

Can’t WRITE

DEFECT

(DEFECT)

Din UNLOCK

(UNLOCK)

READ ERROR

(E-READ)

DISC FULL

HOLD

(HOLD)

LOCKED

LOCK ERROR

NO DISC

PB DISC

POWER ?

SORR

(SORR

SYSTEM ERR

(E-SYS)

TEMP OVER

(E-TEMP)

OC ERR

(E-T

OC)

OC FULL

otect

U T

ERR

(E-UT

OC)

? DISC

(?DISC)

Meaning

PROTECTED

Содержание MD-MT821(GL)





















































Результаты поиска

Содержание MD-MT821(GL)

Отзывы:

Похожие инструкции для MD-MT821(GL)

Бренды по названию

Популярные бренды

Sharp MD-MT821(GL), Руководство по обслуживанию

Результаты поиска

Содержание MD-MT821(GL)

Отзывы:

Похожие инструкции для MD-MT821(GL)

Бренды по названию

Популярные бренды