Sharp M20X - Notevision Digital Video Projector, Руководство по эксплуатации

Страница: 24 / 87

Connecting the Projector to Other Devices
Before Connecting
Note
•
Before connecting, be sure to turn off both the projector and the devices to be connected. After making all
connections, turn on the projector and then the other devices.
When connecting a computer, be sure that it is the last device to be turned on after all the connections are
made.
•
Be sure to read the operation manuals of the devices to be connected before making connections.
Connecting the Power
Cord
1
Plug in the supplied power
cord into the AC socket on the
rear of the projector.
This projector can be connected to:
A computer using:
■
A DVI to 15-pin D-sub cable (See page 21 .)
■
A DVI cable (type AN-C3DV) (sold separately)
(See page
22 .)
Component video or audio-visual equipment:
■
A DVD player or DTV* decoder (See page 23 .)
■
A VCR, Laser disc player or other audio-visual equipment
(See page
24 .)
*DTV is the umbrella term used to describe the new digital television
system in the United States.
A monitor using:
■
An RGB monitor loop-out adaptor (AN-A1MY) (sold sepa-
rately) and an RGB cable (commercially available). (See
page
25 .)
Supplied
accessory
Power cord
-20