Sharp LL-T1815, Руководство по эксплуатации

Страница: 25 / 156

25
English
Deutsc
h
Fran
ç
ais
Italiano
Espa
ñ
ol
English
Adjusting the screen display
(With digital connection)
MODE SELECT-2 Menu
MODE SELECT - 2
OSD
LANGUAGE
EXPAND
OFF ON1 ON2
SCARING 1
INPUT-2 DIGITAL
1280 x 1024 V : 60Hz H : 64kHz
Notes:
- Depending on the resolution of the input signal,
even if menu options can be selected, the display
may not change.
- To choose a menu option: button
- When adjustment complete: MENU button
OSD
After selecting [OSD], press the button.
OSD H-POSITION (OSD horizontal position)
The position of the OSD display can be moved
to the left and right. ( buttons)
OSD V-POSITION (OSD vertical position)
The position of the OSD display can be moved
up and down. ( buttons)
OSD PIVOT
The orientation of the OSD display can be
changed.( buttons)
ON: Orientation for long height display
OFF: Orientation for long width display
LANGUAGE
Messages displayed on the screen and OSD Menu
contents can be changed to the following languages.
1.After selecting [LANGUAGE], press the button.
2.Select the desired language using the
button.
3.Press the MENU button.
EXPAND (Screen expansion)
For display modes of less than 1280 X 1024 pixels,
the display can be expanded if desired. (
buttons)
OFF: Expansion off
ON1: Using the fixed aspect ratio, the entire
screen is enlarged.
ON2: The entire screen is enlarged.
Note:
-
If a resolution of 1280 X 1024 pixels cannot be
achieved even after expansion is attempted, the
screen’s perimeter will display black. (This is not
a malfunction.)
SCALING (Level of scaling)
If [EXPAND] is set on [ON1] or [ON2], the sharp-
ness of the image can be adjusted. ( buttons)