Connection wizard
The integrated Connection wizard shows you which
terminal you should connect your equipment to.
Connect the equipment according to the diagram and
follow the messages one after the other.
NOTE
• New devices should not be connected until they have been
registered in the connection wizard.
Press
MENU
and the TV menu screen displays.
Press
c
/
d
to select “Connections”, and then
press
b
to move down.
Press
a
/
b
to select “AV setup”, and then press
OK
.
• The connection wizard screen displays.
Press
OK
.
The screen shows a default screen,
which may differ from the actual connection.
Press
OK
to proceed.
Default
screen
Connection wizard
Now the TV set assumes that you have connected the following equipment:
EXT4
EXT1
EXT2
EXT3
EXT5
EXT6
AV setup
1
2
3
4
Connecting external devices
The AV equipment selection screen opens.
Select device(s) to connect with
a
/
b
, and then
press
YELLOW
to mark. A marked device is
indicated with
✔
. For example, if connecting
DVD recorder with HDMI terminal to the TV,
select “HDMI/DVI” and then press
YELLOW
to
register. You can connect other devices in the
same way.
Connection wizard
Specify all new AV devices to be connected and all connection changes to the existing
devices here.
AV setup -> AV equipment selection
Video recorder
DVD player
DVD recorder
Satellite receiver
SetTopBox/dBox
Decoder
Camcorder/camera
Other device(s) to EXT1/2/4
Device to EXT3
Device to EXT5
Device to EXT6
DVD
DVD •
VCR
SAT
STB
Decoder
Camera
AV
COMP.IN
HDMI/DVI
HDMI/DVI
Next, the connection diagram shows how to
connect the new or preset devices to the rear
terminals. Press
OK
to proceed.
• If you specify a decoder for connection, you will be
directed to “Select decoder station(s)” submenu.
Specify the signal type for the terminal. If you
are not sure, select the automatic setting.
Follow the instructions on the screen for the rest
of the process.
Items
Explanation
Connections
and signal
The signal type of the devices that can be
connected can vary greatly. If you are not sure,
leave the setting for “Signal” on “Automatic
CVBS/YC” (e.g. for DVD Player/Recorder) or
“Autom.-VHS/SVHS” (e.g. VCR), otherwise select
the right signal type.
Immediate
playback
If the picture from a connected device is to be
displayed immediately on the TV set during
playback, select “yes”. A switching voltage is
allowed so that you do not have to switch over
manually to see the picture of the connected
device. (See the operating manual for the
connected reproduction device.)
When playing from AV Link devices, the picture is
always displayed immediately, regardless of the
setting.
Assign digital
audio input
Select the AV socket to which the device of
which you want to hear the digital sound is
connected. Connect the digital output of the
external device to the digital input of the TV set.
(Page 22) If a device with digital audio is not
connected then select “no”.
5
6
7
8
15
LC-52HD1E-gb.indd 15
LC-52HD1E-gb.indd 15
2008/03/24 15:00:55
2008/03/24 15:00:55
Downloaded From TV-Manual.com Manuals
