Appendix
Problem
Possible Solution
Playback doesn’t start.
•
No disc is inserted. (See page 23.)
•
The disc may be dirty. Clean up the disc. (See page 21.)
•
The TV/DVD cannot play CD-ROMs, etc. (See page 21.)
•
No picture.
•
TV/DVD selector is not set correctly. (See page 23.)
•
No sound.
•
Check the input selector of the amplifier is set properly.
•
The TV/DVD is in the special playback mode. (See pages 23, 24.)
•
Select the correct Audio Output position on AV amplifier.
•
Picture is distorted during fast
•
reverse/forward playback.
The picture will be distorted occasionally.
•
Stopping playback, search, slow
•
motion play, repeat play, or program
play, etc. cannot be performed.
Some discs may not do some of the functions.
•
No surround sound.
•
The setup does not match your stereo system.
•
The TV/DVD or remote operation
•
key is not functioning.
Turn off the TV/DVD and unplug the AC power cord for several minutes,
•
then replug it.
Playback does not start when the
•
title is selected.
Check the Parental setup. (See page 30.)
•
Audio soundtrack and/or subtitle
•
language is not changed when you
playback a DVD.
Multilingual language is not recorded on the DVD disc. (See page 24.)
•
No subtitle.
•
Some discs have no subtitles. (See page 24.)
•
Subtitles are cleared. Press
•
. (See page 24.)
Angle cannot be changed.
•
Multi-angles are not recorded on the DVD disc. (See page 25.)
•
“This operation can’t be performed”
•
appears on the screen.
The function is prohibited with the TV/DVD or the disc. (See page 24.)
•
Cautions regarding use in high and low temperature environments
When the unit is used in a low temperature space (e.g. room, office), the picture may leave trails or appear
•
slightly delayed. This is not a malfunction, and the unit will recover when the temperature returns to normal.
Do not leave the unit in a hot or cold location. Also, do not leave the unit in a location exposed to direct
•
sunlight or near a heater, as this may cause the cabinet to deform and the LCD panel to malfunction.
Storage temperature: –20°C to +60°C.
Devices connected to the protective earthing of the building installation through the MAINS connection or
through other devices with a connection to protective earthing and to a television distribution system using
coaxial cable, may in some circumstances create a fire hazard. Connection to a television distribution system
therefore has to be provided through a device providing electrical isolation within a certain frequency range
(galvanic isolator, see EN 60728-11).
NOTE
For requirements in Norway and Sweden, the requirements for isolation are also relevant for devices that can
•
be connected to television distribution systems.
Troubleshooting-DVD
37
54B0101A_English.indd 37
54B0101A_English.indd 37
3/2/2010 11:01:12
3/2/2010 11:01:12
