TV menu
illustration 1:
Letterbox image is increased
WSS:
Public broadcasters include 16:9 identification,
the WSS signal (WideScreenSignalling), during
transmission in order to ensure automatic conversion
to 16:9.
Other formats
Press
∏
until the desired size is reached.
4:3
The picture is displayed in 4:3 format with black bars to
the right and left.
16:9
The width of the picture will be zoomed evenly.
14:9
The picture is increased somewhat but not up to the
full screen width. Black bars remain on the right and left
and also at the top and bottom.
Cinema
Use Cinema to increase a small 4:3 letterbox signal.
If the picture is surrounded by a black border as in the
illustration, this is a 4:3 letterbox signal.
Cinema increases this picture that is too small as far
as possible.
Real (HDMI / PC mode)
The picture is displayed with original size.
NOTE
In PC mode, the picture size feature is available only for
•
16:9-, 4:3- or Real format.
For PC input signal over WXGA, Real format is not
•
availabe and adjusted to 16:9 format.
External receivers can automatically adjust the picture
•
size via a SCART cable. Please read the instructions for
the external receiver.
Analogue Ch Fine Tune
You can manually fine tune analogue channels when
reception is poor.
Press
1.
TV MENU
on the remote control and
select
≥
Channel Set Up
. Then press
OK
or
.
NOTE
You are prompted to enter current password to enter
•
Channel Set Up
if
Channel Block
in the
Parental
menu is not the default setting.
Press
2.
/
to select
Fine
and press
OK
or
to enter the analogue channel list.
Press
3.
/
to select one channel and press
OK
to enter.
Press
4.
/
to adjust the frequency.
When complete, press
5.
OK
to set the frequency.
The fine tuned channel is stored under the
current channel number.
Follow the on-screen instructions to exit.
6.
NOTE
This option is unavailable if no analogue channels were
•
found.
Features
Change picture format
Change the picture format to suit your content.
Press
1.
∏
repeatedly to select one of the
following picture formats.
Auto
The picture is automatically only then shown in a
format-filling display when a WSS-TV signal is received.
Example:
If the analogue tuner receives a letterbox image with
WSS signal then the resulting image looks like this:
17
54B0101A_English.indd 17
54B0101A_English.indd 17
2/27/2010 17:23:28
2/27/2010 17:23:28
