EN - 9
Worktop
min.
25 mm
min.
50 mm
Built-in hob
Built-in oven
If the oven is installed under a hob, the
distance between the worktop and the
top panel of the oven must be a mini-
mum of 50 mm and the distance bet-
ween the worktop and the top of control
panel must be a minimum of 25 mm.
WIRING AND SAFETY OF THE
BUILT IN OVEN
The instructions given below must be
followed explicitly during wiring:
–
The grounding cable must be connec-
ted via the screw with the grounding
mark. The supply cable connection
must be carried out as shown in Fi-
gure 6. If there is no grounded outlet
conforming to regulations in the ins-
tallation environment, call the Authori-
zed Service Centre immediately.
–
The grounded outlet must be in clo-
se proximity to the appliance.
Never use an extension cord.
–
The supply cable should not
contact the product’s hot surface.
–
In the event of any damage
to the supply cable, make sure to
call the Authorized Service Centre.
The cable must be replaced by the
Authorized Service technician.
–
Wiring of the appliance must be per-
formed by the Authorized Service
technician. A H05VV-F type supply
cable must be used.
–
Faulty wiring may damage the appli-
ance. Such damage will not be cove-
red under the warranty.
–
The appliance is designed to connect
to 220-240V~. If the electricity is diffe-
rent than the value given above, call
the Authorized Service Centre imme-
diately.
–
The manufacturer declares that its
bears no liability of any kind for
damage and loss arising from not
complying with safety standards!
BROWN
YELLOW
GREEN
BLUE