9
CASSETTE PLAYBACK
• Since treble is emphasised on tapes recorded with Dolby NR
system, for playback of such tapes with this unit, lowering
treble slightly with the GRAPHIC EQUALIZER controls
makes for easier listening.
• When playing a tape with Deck 1, set the DUBBING SPEED
selector switch to the NORMAL position. At the HIGH posi-
tion, the equalizer circuit for high speed operation is activated
and the high range will be lowered.
Load a pre-recorded cassette into the cassette compartment
of Deck 1 and/or Deck 2 and set the tape selector switches
(refer to instructions on page 11).
Refer to the instructions on page 8.
Press the TAPE button of the FUNCTION selector.
INDIVIDUAL PLAYBACK |
Set the CONT PLAY switch to the position.
Press the • PLAY button of Deck 1 or Deck 2 to begin play-
back.
SEQUENTIAL PLAYBACK |
Sequential playback starts with Deck 1 first and then Deck 2,
or vice versa can be performed.
Press the PLAY button of the Deck to be played first.
Then, the first Deck will start.
Set the CONT PLAY switch to the position.
Press the • PLAY button of the Deck to be played finally.
(Playback of the Cassette Deck to be played finally will
begin when the Cassette Deck played first has ended)
[SIMULTANEOUS PLAYBACK[
Set the CONT PLAY switch to the[1]&/or[2]position.
Press the • PLAY buttons of Deck 1 and Deck 2 simultane-
ously.
The stereo audio reproduction from both cassettes will be
mixed and reproduced concurrently from the speakers.
• Adjust volume and sound quality (refer to instructions on page
9.)
TO INTERRUPT PLAYBACK
Press the II PAUSE button to discontinue playback temporarily.
The tape will stop at the point where this button is pressed. The
playback will be resumed from this point when the II PAUSE
button is pressed again.
HOW TO STOP THE TAPE
To stop the tape when the unit is in the recording, playback, fast
forward, rewind or APLD mode, press the
button.
FULL AUTO STOP SYSTEM
When the tape is reached to the end while the unit is in the
recording, playback, fast forward, rewind mode, the full auto
stop system is activated, and it automatically set the deck to the
stop mode.
• The auto-stop system may not be functioned when the unit is
battery powered and the batteries are weak.
12
Содержание GF-800Z
Страница 1: ......
