Sharp FU-800-J, Руководство по эксплуатации

Страница: 24 / 28

CARE AND MAINTENANCE
E-22
Back of the
Front Panel
Housings
Phillips Screws
Protruding catches
FILTER CLEANING
The care cycles of filters are once three
months
1
Extract the handles at the top
and bottom of the Filter Frame,
pull them out, and remove the
Filter Frame from the Main unit.
NOTE
Two filters (top and bottom) are attached
to the Filter Frame. After removal, lay
the Filter Frame flat with the handles fac-
ing upwards.
2
Clean the top surface of the Pre-
Filter lightly with a vacuum
cleaner.
NOTE
The HEPA Filter and Active Carbon Filter
are damaged easily. Do not bring it into
direct contact with the nozzle of a vacuum
cleaner.
They should never be washed with
water.
3
Holding the Filter Frame by its
handle, secure it to the main
unit.
Recess both the top and bottom han-
dles into the Main unit.
SETTING THE FRONT
PANEL
Insert the two protruding catches
located on the back of the Front
Panel into their housings on the
Main unit, and affix the Front Panel
to the Main unit using the top
screws (one each left and right).
Front Panel
Handle
Pre-Filter