Sharp FU-800-J, Руководство по эксплуатации

Страница: 12 / 28

Be sure to remove the power plug from the wall outlet.
E-10
PREPARATION
• Be sure to remove the Power Plug from the wall outlet.
Handle
Pre-Filter
Tabs (X4)
Filter fixers
FILTER INSTALLATION
CAUTIONS
• If you push the Front Panel,
the Main unit will be broken.
• Do not loosen the screws
which hold the Fan Guards.
To maintain the quality of the filters, they
are placed in the Main unit within plastic
bags. Be sure to remove the filters from
the plastic bags before using the unit.
1
Filter Removal
1
Confirm to remove the Power Plug
and press the Main Power Switch at
the front side.
2
Extract the handles at the top and bot-
tom of the Filter Frame, pull them out,
and remove the Filter Frame from the
Main unit.
NOTE
Two filters (top and bottom) are attached to the
Filter Frame. After removal, lay the Filter Frame
flat with the handles facing upwards, and replace
the filters.
3
Unhook the four tabs on the Pre-Fil-
ter, and remove the Filter Fixers. (Two
each top and bottom)
4
Extract the Active Carbon Filter (black
(back: white)) and HEPA Filter (white).
(One each top and bottom)
5
Remove the Active Carbon Filters
(black,white) and HEPA Filter from the
plastic bags.
Press
Deodorizing Filter (Front: black)
Microbial Control Filter (Back: white)
HEPA Filter
Filter Frame
Fan Guards