23
3
SYSTEM SETTINGS
The system settings allow the administrator of the machine to enable and disable functions to suit the needs of the
workplace. This chapter explains system settings for the printer and scanner functions. For system settings that are
common to all modes, see the "System settings guide".
SYSTEM SETTINGS LIST
The system settings for the printer and scanner functions are shown in the following table. Factory default settings
are indicated in bold. When "ENABLE, DISABLE" appears in the "Settings" column of a program, the program is
enabled by pressing the [OK] key so that a checkmark appears in the checkbox. A checkmark in the checkbox (
)
indicates that "ENABLE" is selected. No checkmark (
) indicates that "DISABLE" is selected.
For the initial administrator password set at the factory, see "PROGRAMMING AN ADMINISTRATOR
PASSWORD" in the "System settings guide".
Mode
System settings
Settings
Explanation
Printer
NOTICE PAGE
ENABLE,
DISABLE
Select whether or not a Notice Page is printed
when printing is not successful due to a
memory full (or other) error.
FORCED OUTPUT OF
PRINT
ENABLE,
DISABLE
When no tray has the specified size of paper,
this setting is used to select whether or not
the print job will be printed on the closest size
of paper.
Scanner
DISABLE USB SCAN
YES,
NO
Select whether or not scanning from a
computer and scanning from the machine are
disabled. When "YES" is selected, USB
scanning is disabled.
