Remote Operations
37
4. Ans
w
er
ing
System
Other remote commands
After listening to your messages, you
can enter any of the following
commands.
Note:
The following commands cannot
be entered while messages are being
played. If you do not want to wait until
playback ends to enter a command, first
stop playback by pressing
,
,
and then enter the command.
Changing the reception mode
♦
A.M. mode:
, ,
♦
FAX mode:
, ,
♦
TEL mode:
, ,
Caution:
If you select TEL mode, you
will not be able to enter any other
remote commands.
♦
TEL/FAX mode:
, ,
Recording a new outgoing message
1
Press , .
2
When you hear a short beep, speak
into the telephone to record the new
message.
•
The message can be up to 60
seconds long. After 60 seconds, you
will hear a beep, and the new
message will play back. To stop
recording before 60 seconds
elapses,
press , .
Recording a “memo” (p. 32)
1
Press , .
2
When you hear a short beep, speak
into the telephone to record the
memo.
3
When you are finished, press
,
.
OGM Only mode (p. 33)
Turning on OGM Only mode:
Press , , .
Turning off OGM Only mode
:
Press , , .