Quick Reference Guide
61
EN
GL
IS
H
Installing the Toner Cartridge
1. Grasp the print compartment cover at
both sides as shown, and pull up to open
the cover.
•
Caution!
The fusing unit inside the print
compartment becomes very hot during
operation. Do not touch the inside of the
compartment or the paper guide on the
underside of the print compartment cover.
2. The drum cartridge has been installed at
the factory. Gently pull the paper tab to
remove the black sheet of protective
paper from the cartridge.
•
Be careful not to tear the paper nor leave
any pieces of paper in the machine.
3. Remove the new toner cartridge from its
packaging. Shake the cartridge side to
side four or five times to distribute the
toner evenly within the cartridge.
Carefully remove the band and the
cardboard packaging material from the
toner cartridge.
4. Hold the toner cartridge by the handle
with the stamped markings on the
cartridge facing upwards, and insert the
cartridge into the print compartment.
5. Place your thumb on the centre of the
handle where it is marked
PUSH
, and
push the handle down and in so that the
cartridge fits into place.
6. Close the print compartment cover,
pressing down firmly on each side to
make sure it is completely closed.
7. Reset the toner counter by pressing the
following sequence of keys:
8. Reset the drum counter by pressing the
following sequence of keys:
9
START
FUNCTION
9
START
FUNCTION
all-fo2950se.book Page 61 Tuesday, November 21, 2000 3:27 PM
Содержание FO-2950M - B/W Laser - All-in-One
