Sharp FO-2600, Руководство по эксплуатации

Страница: 86 / 105

Setting 16: COPY CUT-OFF
Press "1" (CONTINUE) to have documents longer than the printing paper be continued on a
second page when copied. Press "2" (CUT-OFF) to have the part outside that length not printed.
•
Factory setting: "2"
Setting 17: BEEP LENGTH
This sets the duration of the beep which signals the end of transmission, reception, or copying.
Press "1" for 3 seconds, "2" for 1 second, or "3" for no beep.
•
Factory setting: "1"
Setting 18: FOOTER PRINT
Press "1" (YES) to have the transmitting machine’s fax number (if provided) together with the
date and time of reception printed at the bottom of each page you receive (this is in addition to
similar information printed at the top of each page). Press "2" (NO) for no footer printing.
•
Factory setting: "1"
Setting 19: DIAL MODE
This sets the mode of dialling. Press "1" if you are on a tone dial line, or "2" if you are on a pulse
dial line.
•
Factory setting: "1"
Setting 20: ERROR CORRECTION MODE (ECM)
Press "1" (YES) to have any distortions in a transmission due to noise on the telephone line be
corrected before print-out at the receiving end. This is only effective when the other machine
has ECM as well. Press "2" (NO) to turn the function off.
•
Factory setting: "1"
Setting 21: PBX RECALL
This sets the recall mode used for transferring calls on a PBX or utilising BT Network services.
Refer to your PBX manual or consult your supplier for the correct setting if the factory setting is
inappropriate. Enter "1" for earth recall, "2" for time break recall, or "3" for no operation.
•
Factory setting: "2"
Setting 22: RINGING VOLUME
This sets the volume of the ringer. Press "1" for low, "2" for middle, or "3" for high.
•
Factory setting: "2"
Setting 23: MERCURY FUNCTION
This is used to select the Mercury Residential Service (U.K only). Press "1" (YES) to enable the
function, or "2" (NO) to disable it.
•
Factory setting: "1"
OPTIONAL SETTINGS
6-4 OPTIONAL SETTINGS