background image

Calculations Using Engineering Prefi xes 

17

Calculation can be executed in NORMAL mode (excluding 
N-base) using the following 9 types of prefi xes.

Prefi x

Operation

Unit

k

M

G

T

m

µ

n

p

f

(kilo)

(Mega)

(Giga) 

(Tera)

(milli)

(micro)

(nano)

(pico)

(femto)

N

 

3

 

0

N

 

3

 

1

N

 

3

 

2

N

 

3

 

3

N

 

3

 

4

N

 

3

 

5

N

 

3

 

6

N

 

3

 

7

N

 

3

 

8

10

3

10

6

10

9

10

12

10

–3

10

–6

10

–9

10

–12

10

–15

Modify Function 

18

Decimal calculation results are internally obtained in scientifi c 
notation, with up to 14 digits in the mantissa. However, since 
calculation results are displayed in the form designated by the 
display notation and the number of decimal places indicated, 
the internal calculation result may differ from that shown in the 
display. By using the modify function (

@

 

n

), the internal 

value is converted to match that of the display, so that the 
displayed value can be used without change in subsequent 
operations.

•  When using the WriteView editor, if the calculation result is 

displayed using fractions or irrational numbers, press 

U

 

to convert it to decimal form fi rst.

•  The modify function can be used in NORMAL, STAT, MATRIX, 

or LIST modes.

Simulation Calculation (ALGB) 

19

If you have to fi nd values consecutively using the same 
expression, such as plotting a curve line for 2

x

2

 + 1, or fi nding the 

variable values for 2

x

 + 2

y

 =14, once you enter the expression, 

all you have to do is to specify the value for the variable in the 
equation.

Usable variables: A–F, M, X and Y

•  Simulation calculations can only be executed in NORMAL 

mode.

•  Calculation ending instructions other than 

=

 cannot be 

used.

Performing calculations

1. Press 

b

 

0

.

2.  Input an expression with at least one variable.

3. Press 

N

 

1

.

4.  The variable entry screen will appear. Enter a value, 

then press 

e

 to confi rm. The calculation result will be 

displayed after you have entered a value for each variable 
used in the equation.

•  After completing the calculation, press 

N

 

1

 to 

perform calculations using the same equation. 

•  Variables and numerical values stored in the memories 

will be displayed in the variable entry screen. If you do 
not want to change any values, simply press 

e

.

•  Performing simulation calculation will cause values in 

memory to be overwritten with new values.

Solver Function 

20

The solver function fi nds the value for 

x

 that reduces the 

entered expression to zero.

•  This function uses Newton’s method to obtain an 

approximation. Depending on the function (e.g. periodic) or 
start value, an error may occur (ERROR 02) due to there 
being no convergence to the solution for the equation.

•  The value obtained by this function may include a margin of 

error. If it is larger than acceptable, recalculate the solution 
after changing the “Start” and 

d

x

 values.

•  Change the “Start” value (e.g. to a negative value) or 

d

x

 

value (e.g. to a smaller value) if:

•  no solution can be found (ERROR 02).

•  more than two solutions appear to be possible (e.g. a 

cubic equation).

•  to improve arithmetic precision.

•  The calculation result is automatically stored in the X memory.

• Press 

j

 to exit the solver function.

Performing solver function

1. Press 

b

 

0

.

2.  Input an expression with an 

x

 variable.

3. Press 

N

 

2

.

4.  Enter a “Start” value and press 

e

. The default value is “0”.

5. Enter a 

d

x

 value (minute interval).

6. Press 

e

.

STATISTICAL CALCULATIONS

Statistical calculations can be performed in STAT mode.

There are eight sub-modes within STAT mode. Press 

b

 

1

then press the number key that corresponds to your choice:

0

 (

S#a#

 

0

 [

SD

]): Single-variable statistics

1

 (

S#a#

 

1

 [

LINE

]): Linear regression

2

 (

S#a#

 

2

 [

QUAD

]): Quadratic regression

3

 (

S#a#

 

3

 [

E_EXP

]): Euler exponential regression

4

 (

S#a#

 

4

 [

LOG

]): Logarithmic regression

5

 (

S#a#

 

5

 [

POWER

]): Power regression

6

 (

S#a#

 

6

 [

INV

]): Inverse regression

7

 (

S#a#

 

7

 [

G_EXP

]): General exponential regression

Statistical Calculations and Variables 

21

The following statistics can be obtained for each statistical 
calculation (refer to the table below):

Single-variable statistical calculation

Statistics of 

 and the value of the normal probability function

Linear regression calculation

Statistics of 

 and 

. In addition, the estimate of 

y

 for a given 

x

 

(estimate 

y

´) and the estimate of 

x

 for a given 

y

 (estimate 

x

´).

Quadratic regression calculation

Statistics of 

 and 

, and coeffi cients 

a

b

c

 in the quadratic 

regression formula (

y

 

=

 

a

 

+

 

b

x

 

+

 

cx

2

). (For quadratic regression 

calculations, no correlation coeffi cient (

r

) can be obtained.) When 

there are two 

x

´ values, each value will be displayed with “1:” or 

“2:”, and stored separately in the X and Y memories.

Euler exponential regression, logarithmic regression, power 
regression, inverse regression, and general exponential 
regression calculations

Statistics of 

 and 

. In addition, the estimate of 

y

 for a given 

x

 

and the estimate of 

x

 for a given 

y

. (Since the calculator converts 

each formula into a linear regression formula before actual 
calculation takes place, it obtains all statistics, except coeffi cients 

a

 

and 

b

, from converted data rather than entered data.)

x

Mean of samples (

x

 data)

sx

Sample standard deviation (

x

 data)

σ

x

Population standard deviation (

x

 data)

n

Number of samples

Σ

x

Sum of samples (

x

 data)

Σ

x

2

Sum of squares of samples (

x

 data)

y

Mean of samples (

y

 data)

sy

Sample standard deviation (

y

 data)

σ

y

Population standard deviation (

y

 data)

Σ

y

Sum of samples (

y

 data)

Σ

y

2

Sum of squares of samples (

y

 data)

Σ

xy

Sum of products of samples (

x

y

)

r

Correlation coeffi cient

a

Coeffi cient of regression equation

b

Coeffi cient of regression equation

c

Coeffi cient of quadratic regression equation

• Use 

;

 and 

t

 to perform a variable calculation in STAT 

mode.

• 

U

 does not function in STAT mode.

Data Entry and Correction 

22

Before entering new data, clear the memory contents (

@

 

Z

).

Data entry

Single-variable data

Data

 

_

Data

 

H

 

frequency

 

_

 (To enter multiples of the same 

data)

Two-variable data

Data

 

x

 

H

 

data

 

y

 

_

Data

 

x

 

H

 

data

 

y

 

H

 

frequency

 

_

 (To enter multiples 

of the same data 

x

 and 

y

)

Note:  Up to 100 data items can be entered. With the single-

variable data, a data item without frequency assignment 
is counted as one data item, while an item assigned with 
frequency is stored as a set of two data items. With the 
two-variable data, a set of data items without frequency 
assignment is counted as two data items, while a set of 
items assigned with frequency is stored as a set of three 
data items.

Data correction

Correction before pressing 

_

 immediately after a data entry:

Delete incorrect data with 

j

, then enter the correct data.

Correction after pressing 

_

:

Use 

u

 and 

d

 to display the previously entered data set.

Press 

d

 to display the data set in ascending (oldest fi rst) 

order. To reverse the display order to descending (latest fi rst), 
press the 

u

 key. Press 

@

 

u

 or 

@

 

d

 to jump 

the cursor to the beginning or end of the data set.

Each data set is displayed with “X:”, “Y:”, or “F:”.

Data set number
Data 

x

Frequency

Data set number

Data 

x

Data 

y

Frequency

Display and move the cursor to the data item to be modifi ed 
by using 

u

 and 

d

, enter the correct value, then press 

_

 or 

e

.

•  To delete a data set, display and move the cursor to an item 

of the data set to delete by using 

u

 and 

d

, then press 

@

 

#

. The data set will be deleted.

•  To add a new data set, press 

j

 to exit the display of previously 

entered data and input the values, then press 

_

.

Statistical Calculation Formulas 

23

Type

Regression formula

Linear

y

 

=

 

a

 

+

 

bx

Quadratic

y

 

=

 

a

 

+

 

bx

 

+

 

cx

2

Euler exponential

y

 

=

 

a

 

 

e

b

x

Logarithmic

y

 

=

 

a

 

+

 

b

 

 ln 

x

Power

y

 

=

 

a

 

 

x

b

Inverse

y

 

=

 

a

 

+

 

b

 

1

x

General exponential

y

 

=

 

a

 

 

b

x

An error will occur when:

•  The absolute value of the intermediate result or calculation 

result is equal to or greater than 1 

×

 10

100

.

•  The denominator is zero.

•  An attempt is made to take the square root of a negative number.

•  No solution exists in the quadratic regression calculation.

Normal Probability Calculations 

24

In STAT mode, the three probability density functions can be 
accessed under the MATH menu, with a random number used as 
a normal distribution variable.

Notes:

•  P(t), Q(t), and R(t) will always take positive values, even when 

t < 0, because these functions follow the same principle used 
when solving for an area.

•  Values for P(t), Q(t), and R(t) are given to six decimal places.

•  The standardization conversion formula is as follows:

 

t

 = 

x

 

 

x

σ

x

DRILL MODE

Math Drill: 

b

 

2

 

0

Math operation questions with positive integers and 0 are 
displayed randomly. It is possible to select the number of 
questions and operator type. 

Multiplication Table (

×

 Table): 

b

 

2

 

1

Questions from each row of the multiplication table (1 to 12) are 
displayed serially or randomly.

To exit DRILL mode, press 

b

 and select another mode.

Using Math Drill and 

×

 Table

1. Press 

b

 

2

 

0

 for Math Drill or 

b

 

2

 

1

 for 

×

 Table.

2. 

Math Drill

: Use 

u

 and 

d

 to select the number of 

questions (25, 50, or 100).

×

 

Table

: Use 

u

 and 

d

 to select a row in the 

multiplication table (1 to 12).

3. 

Math Drill

: Use 

l

 and 

r

 to select the operator type for 

questions (

+

×

÷

, or 

+−×÷

).

×

 

Table

: Use 

l

 and 

r

 to select the order type (“Serial” 

or “Random”).

4. Press 

e

 to start.

When using Math Drill or 

×

 Table (random order only), 

questions are randomly selected and will not repeat except 
by chance.

5.  Enter your answer. If you make a mistake, press 

j

 or 

N

 

to clear any entered numbers, and enter your answer again.

6. Press 

e

.

•  If the answer is correct, “

” appears and the next question 

is displayed.

•  If the answer is wrong, “

” appears and the same question 

is displayed. This will be counted as an incorrect answer.

•  If you press 

e

 without entering an answer, the correct 

answer is displayed and then the next question is displayed. 
This will be counted as an incorrect answer.

7.  Continue answering the series of questions by entering the 

answer and pressing 

e

.

8.  After you fi nish, press 

e

 and the number and percentage 

of correct answers are displayed.

9. Press 

e

 to return to the initial screen for your current drill.

Math Drill sample

Current question/
Total questions

Question

See step 6 above.

Number of questions
Operator type

Percentage correct
Correct answers

×

 Table  sample

Total remaining questions

Question

See step 6 above.

Multiplicand
Order type

Percentage correct
Correct answers

Ranges of Math Drill Questions

The range of questions for each operator type is as follows. 

+

 Addition 

operator

: “0 

+

 0” to “20 

+

 20”

]

 Subtraction 

operator

: “0 

 0” to “20 

 20”; answers are 

positive integers and 0.

>

 Multiplication 

operator

: “1 

×

 0” or “0 

×

 1” to “12 

×

 12”

)

 Division 

operator

: “0 

÷

 1” to “144 

÷

 12”; answers are 

positive integers from 1 to 12 and 0, dividends of up to 
144, and divisors of up to 12.

+]>)

 Mixed 

operators

: Questions within all the above 

ranges are displayed.

COMPLEX NUMBER CALCULATIONS 

25

To carry out addition, subtraction, multiplication, and division 
using complex numbers, press 

b

 

3

 to select CPLX mode.

Results of complex number calculations are expressed using two 
systems:

 

@

 

E

: Rectangular coordinate system

 (The 

 symbol appears.)

 

@

 

u

: Polar coordinate system

 (The 

 symbol appears.)

Complex Number Entry

 Rectangular coordinates

 

x-coordinate

 

+

 

y-coordinate

 

O

 or 

x-coordinate

 

+

 

O

 

y-coordinate

 Polar coordinates

 

r

 

Q

 

θ

 

r

: absolute value      

θ

: argument

•  On selecting another mode, the imaginary part of any complex 

number stored in the independent memory (M) and the last 
answer memory (ANS) will be cleared.

trans 

matrix name

Returns the matrix with the columns 
transposed to rows and the rows 
transposed to columns.

mat

list

(

N

 

7

)

Creates lists with elements from the 
left column of each matrix. (matA

L1, 

matB

L2, matC

L3, matD

L4)

Mode changes from MATRIX mode to 
LIST mode.

matA

list

(

N

 

8

)

Creates lists with elements from each 
column of the matrix. (matA

L1, L2, 

L3, L4)

Mode changes from MATRIX mode to 
LIST mode.

Notes:

•  When the matrix entry screen is displayed, you cannot 

perform matrix calculations because the MATH menu is not 
available.

•  If the calculation result is a matrix, it will be displayed in the 

matrix entry screen (note that this replaces any existing 
data in the buffer). To store the calculation result, fi rst press 

j

 to exit the matrix entry screen. Press 

N

 

4

 and 

select a memory (matA–matD) to store the newly-created 
matrix in.

•  When the calculation results are in matrix form, pressing 

neither 

l

 nor 

r

 will bring you back to the original 

expression.

LIST CALCULATIONS 

27

You can store and calculate up to 
four lists of up to sixteen elements 
each in LIST mode. 

Press 

b

 

5

 to enter LIST 

mode.

Note: You can use the MATH menu in LIST mode to edit, recall, 

and store lists, as well as to call list-specifi c functions.

Entering and Storing Lists

Before performing list calculations, a list must be created. 
Follow the steps below to enter and store lists.

1. Press 

b

 

5

 to enter LIST mode.

2. Press 

N

 

2

 to bring up the list entry screen.

•  Any list data remaining in the buffer, along with any 

previously entered, loaded, or calculated list data, will be 
displayed.

3.  Defi ne the list size (up to sixteen elements) by entering a 

value using the number keys and pressing 

e

.

List size
Element fi elds

Entry fi eld

List entry screen (example)

4.  Enter each element in the list by entering a value in the 

entry fi eld and pressing 

e

•  Each list element can display up to eight digits (the 

decimal point counts as one digit). If an element exceeds 
eight digits in length, it will be displayed in exponent 
notation within the list.

•  A maximum of six elements can be displayed at one 

time. Use 

u

d

l

, and 

r

 to move the 

cursor through the list.

5.  When you have entered a value for each element, press 

j

 to exit the list entry screen.

6. Press 

N

 

4

 and select a memory (L1–L4) to store 

the newly-created list in.

Modifying a stored list

1.  To load a stored list into the list entry screen, press 

N

 

3

, then select the memory (L1–L4) that holds the list 

you wish to modify.

•  Loading new data into the screen will automatically 

replace any data that may already exist there.

2.  Using the list entry screen, you can modify the values of 

elements in the list. Assign new values wherever necessary 
and press 

e

 after each one.

•  If you wish to modify the size of a list, fi rst press 

j

 

N

 

2

. You can then enter new values for the list size.

3.  When you have fi nished making changes, press 

j

 to 

exit the list entry screen.

4. Press 

N

 

4

 and select a memory (L1–L4) to store 

the newly-created list in.

Using Lists in Calculations

Lists stored in memories (L1–L4) can be used in arithmetic 
calculations and calculations that use 

x

3

x

2

, and 

x

1

. You can 

also use the following list-specifi c functions that are available in 
the MATH menu.

sortA 

list name

Sorts list in ascending order.

sortD 

list name

Sorts list in descending order.

dim (

list name, size

)

Returns a list with size changed as specifi ed.

fi ll (

value, size

)

Enters the specifi ed value for all items.

cumul 

list name

Sequentially cumulates each item in the list.

df_list 

list name

Returns a new list using the difference 
between adjacent items in the list.

aug (

list name, list name

)

Returns a list appending the specifi ed lists.

min 

list name

Returns the minimum value in the list.

max 

list name

Returns the maximum value in the list.

mean 

list name

Returns the mean value of items in the list.

med 

list name

Returns the median value of items in the list.

sum 

list name

Returns the sum of items in the list.

prod 

list name

Returns the multiplication of items in the list.

stdDv 

list name

Returns the standard deviation of the list.

vari 

list name

Returns the variance of the list.

o_prod (

list name, list name

) Returns the outer product of 2 lists (vectors).

i_prod (

list name, list name

)

Returns the inner product of 2 lists (vectors).

abs_list 

list name

Returns the absolute value of the list (vector).

list

mat

(

N

 

7

)

Creates matrices with left column data from 
each list. (L1

matA, L2

matB, L3

matC, 

L4

matD)

Mode changes from LIST mode to MATRIX 
mode.

list

matA

(

N

 

8

)

Creates a matrix with column data from 
each list. (L1, L2, L3, L4

matA)

Mode changes from LIST mode to MATRIX 
mode.

Notes:

•  When the list entry screen is displayed, you cannot perform list 

calculations because the MATH menu is not available.

•  If the calculation result is a list, it will be displayed in the list 

entry screen (note that this replaces any existing data in the 
buffer). To store the calculation result, fi rst press 

j

 to exit 

the list entry screen. Press 

N

 

4

 and select a memory 

(L1–L4) to store the newly-created list in.

•  When the calculation results are in list form, pressing neither 

l

 nor 

r

 will bring you back to the original expression.

EQUATION SOLVERS 

28

The results obtained by these functions may include a margin 
of error.

Simultaneous Linear Equations

Simultaneous linear equations with two unknowns (2-VLE) or 
with three unknowns (3-VLE) may be solved using the following 
functions.

 2-VLE: 

b

 

6

 

0

 

a

1

x

 + 

b

1

y

 = 

c

1

 

a

2

x

 + 

b

2

y

 = 

c

2

 

a

1

 

b

1

 

 

a

2

 

b

2

 

 

 

=  

    

 3-VLE: 

b

 

6

 

1

 

 

a

1

x

 + 

b

1

y

 + 

c

1

z

 = 

d

1

 

a

2

x

 + 

b

2

y

 + 

c

2

z

 = 

d

2

 

a

3

x

 + 

b

3

y

 + 

c

3

z

 = 

d

3

 

a

1

 

b

1

 

c

1

 

a

2

 

b

2

 

c

2

 

a

3

 

b

3

 

c

3

 

 

=  

    

•  If the determinant D = 0, an error occurs.

•  If the absolute value of an intermediate result or calculation 

result is 1 

×

 10

100

 or more, an error occurs.

Solving simultaneous linear equations

1. Press 

b

 

6

 

0

 or 

b

 

6

 

1

.

2.  Enter the value for each coeffi cient (

a

1

, etc.).

•  Coeffi cients can be entered using ordinary arithmetic 

operations.

•  To clear the entered coeffi cient, press 

j

.

• Press 

u

 or 

d

 to move the cursor up or down through 

the coeffi cients. Press 

@

 

u

 or 

@

 

d

 to jump to 

the fi rst or last coeffi cient.

3.  When all coeffi cients have been entered, press 

e

 to solve 

the equation.

•  While the solution is displayed, press 

e

 or 

j

 to 

return to the coeffi cient entry display. To clear all the 
coeffi cients, press 

@

 

Z

.

Quadratic and Cubic Equations

Quadratic (

ax

2

 

+

 

b

x

 

+

 

c

 

=

 0 ) or cubic (

ax

3

 

+

 

b

x

2

 

+

 

cx

 

+

 

d

 

=

  0 ) 

equations may be solved using the following functions.

 Quadratic equation solver: 

b

 

6

 

2

 Cubic equation solver: 

b

 

6

 

3

Solving quadratic and cubic equations

• Press 

b

 

6

 

2

 or 

b

 

6

 

3

.

•  Coeffi cients for these equations can be entered in the same 

manner as those for simultaneous linear equations.

ERRORS AND CALCULATION RANGES

Errors

An error will occur if an operation exceeds the calculation ranges, 
or if a mathematically illegal operation is attempted. When an error 
occurs, pressing 

l

 or 

r

 automatically moves the cursor 

back to the place in the equation where the error occurred. Edit 
the equation or press 

j

 or 

@

 

Z

 to clear the equation.

Error codes and error types

ERROR 01: Syntax error

•  An attempt was made to perform an invalid operation.

Ex. 2 

+

 

&

 5 

=

ERROR 02: Calculation error

•  The absolute value of an intermediate or fi nal calculation 

result equals or exceeds 10

100

.

•  An attempt was made to divide by zero (or an intermediate 

calculation resulted in zero).

•  The calculation ranges were exceeded while performing 

calculations.

ERROR 03: Nesting error

•  The available number of buffers was exceeded. (There are 

10 buffers* for numeric values and 64 buffers for calculation 
instructions).

*  5 buffers in CPLX mode, and 1 buffer for matrix/list data.

ERROR 04: Data over error

•  Data items exceeded 100 in STAT mode.

ERROR 07: Defi nition error

•  Matrix/List defi nition error or the attempted entering of an 

invalid value.

ERROR 08: DIM unmatched error

•  Matrix/List dimensions inconsistent while calculating.

ERROR 09: Invalid DIM error

•  Size of matrix/list exceeds calculation range.

ERROR 10: Undefi ned error

•  Undefi ned matrix/list used in calculation.

Alert Messages 

29

Cannot delete!

•  The selected item cannot be deleted by pressing 

N

 or 

@

 

y

 in the WriteView editor.

Ex. 

@

 

*

 5 

r

 

A

 

l

 

N

In this example, delete the exponent before attempting to 
delete the parentheses.

Cannot call!

•  The function or operation stored in defi nable memory (D1 to 

D4) cannot be called.

Ex. An attempt was made to recall a statistical variable from 
within NORMAL mode.

•  Expressions stored in formula memories (F1 to F4) cannot be 

called.

Buffer full!

•  The equation (including any calculation ending instructions) 

exceeded its maximum input buffer (159 characters in the 
WriteView editor or 161 characters in the Line editor). An 
equation may not exceed its maximum input buffer.

Replacement Procedure

1. Turn the power off by pressing 

@

 

o

.

2. Remove the two screws. (Fig. 1)

3. Slide the battery cover slightly and lift it 

to remove.

4. Remove the used battery by prying it 

out with a ball-point pen or other similar 
pointed device. (Fig. 2)

5. Install one new battery. Make sure the 

+

” side is facing up.

6. Replace the cover and screws.

7. Press the RESET switch (on the back) 

with the tip of a ball-point pen or similar object.

8. Adjust the display contrast. See “Adjusting the Display 

Contrast”.

•  Make sure that the display appears as shown below. If the 

display does not appear as shown, remove the battery, 
reinstall it, and check the display once again.

Automatic Power Off Function

This calculator will turn itself off to save battery power if no 
key is pressed for approximately 10 minutes.

SPECIFICATIONS

Calculation features:

Scientifi c calculations, complex 
number calculations, equation solvers, 
statistical calculations, etc.

Drill features:

Math Drill and Multiplication Table

Display:

96 

×

 32 dot matrix liquid crystal 

display

Display of calculation results:

 

Mantissa: 10 digits

 

Exponent: 2 digits

Internal calculations:

Mantissas of up to 14 digits

Pending operations:

64 calculations 10 numeric values

(5 numeric values in CPLX mode, and 
1 numeric value for Matrix/List data.)

Power source:

Built-in solar cells

1.5 V …

— (DC): Backup battery

(Alkaline battery (LR44 or equivalent) 

×

 1)

Operating time:
(varies according to 
use and other factors)

Approx. 3,000 hours when 
continuously displaying 55555. at 
25°C (77°F), using the alkaline battery 
only

Operating temperature:

0°C–40°C (32°F–104°F)

External dimensions:

79.6 mm (W) 

×

 161.5 mm (D) 

×

 

15.5 mm (H)

3-1/8” (W) 

×

 6-11/32” (D) 

×

 5/8” (H)

Weight:

Approx. 102 g (0.23 lb) (including 
battery)

Accessories:

Battery 

×

 1 (installed), operation 

manual, calculation examples, and 
hard case

FOR MORE INFORMATION
ABOUT SCIENTIFIC CALCULATORS

Visit our Web site.

http://sharp-world.com/calculator/

•  A complex number expressed in rectangular coordinates 

with the y-value equal to zero, or expressed in polar 
coordinates with the angle equal to zero, is treated as a real 
number.

• Press 

N

 

1

 to return the complex conjugate of the 

specifi ed complex number.

MATRIX CALCULATIONS 

26

You can store and calculate up to 
four matrices containing up to four 
rows and four columns each in 
MATRIX mode. 

Press 

b

 

4

 to enter MATRIX mode.

Note:  You can use the MATH menu in MATRIX mode to edit, 

recall, and store matrices, as well as to call matrix-
specifi c functions.

Entering and Storing Matrices

Before performing matrix calculations, a matrix must be 
created. Follow the steps below to enter and store matrices.

1. Press 

b

 

4

 to enter MATRIX mode.

2. Press 

N

 

2

 to bring up the matrix entry screen.

•  Any matrix data remaining in the buffer, along with any 

previously entered, loaded, or calculated matrix data, will 
be displayed.

3.  Defi ne the matrix dimensions (up to four rows by four 

columns) by entering the required dimensions using the 
number keys and pressing 

e

.

Matrix dimensions (row 

×

 column) 

Element fi elds

Entry fi eld

Matrix entry screen (example)

4.  Enter each element in the matrix by entering a value in the 

entry fi eld and pressing 

e

.

•  Each matrix element can display up to seven digits (the 

decimal point counts as one digit). If an element exceeds 
seven digits in length, it may be displayed in exponent 
notation within the matrix.

•  A maximum of three rows by three columns can be 

displayed at one time. Use 

u

d

l

, and 

r

 

to move the cursor through the matrix.

5.  When you have entered a value for each element, press 

j

 to exit the matrix entry screen.

6. Press 

N

 

4

 and select a memory (matA–matD) to 

store the newly-created matrix in.

Modifying a stored matrix

1.  To load a stored matrix into the matrix entry screen, press 

N

 

3

, then select the memory (matA–matD) that 

holds the matrix you wish to modify.

•  Loading new data into the screen will automatically 

replace any data that may already exist there.

2.  Using the matrix entry screen, you can modify the values 

of elements in the matrix. Assign new values wherever 
necessary and press 

e

 after each one.

•  If you wish to modify the number of rows or columns, fi rst 

press 

j

 

N

 

2

. You can then enter new values 

for the matrix dimensions.

3.  When you have fi nished making changes, press 

j

 to 

exit the matrix entry screen.

4. Press 

N

 

4

 and select a memory (matA–matD) to 

store the newly-created matrix in.

Using Matrices in Calculations

Matrices stored in memories (matA–matD) can be used in 
arithmetic calculations (with the exception of division between 
matrices) and calculations that use 

x

3

x

2

, and 

x

1

. You can 

also use the following matrix-specifi c functions that are 
available in the MATH menu.

dim (

matrix name, row, column

)

Returns a matrix with dimensions 
changed as specifi ed.

fi ll (

value, row, column

)

Fills each element with a specifi ed 
value.

cumul 

matrix name

Returns the cumulative matrix.

aug (

matrix name, matrix name

) Appends the second matrix to the 

fi rst matrix as new columns. The fi rst 
and second matrices must have the 
same number of rows.

identity 

value

Returns the identity matrix with 
specifi ed value of rows and columns.

rnd_mat (

row, column

)

Returns a random matrix with 
specifi ed values of rows and columns.

det 

matrix name

Returns the determinant of a square 
matrix.

Calculation Ranges 

30

• 

Within the ranges specifi ed, this calculator is accurate to 

±

1 of the 10th digit of the mantissa. However, a calculation 

error increases in continuous calculations due to 
accumulation of each calculation error. (This is the same 
for 

y

x

x

r

, n!, e

x

, ln, Matrix/List calculations, etc., where 

continuous calculations are performed internally.)
Additionally, a calculation error will accumulate and 
become larger in the vicinity of infl ection points and 
singular points of functions.

• Calculation ranges

±

10

99

 to 

±

9.999999999 

×

 10

99

 and 0.

If the absolute value of an entry or a fi nal or intermediate 
result of a calculation is less than 10

99

, the value is 

considered to be 0 in calculations and in the display.

Display of results using 

r

Calculation results may be displayed using 

r

 when all of the 

following conditions are met:

•  When intermediate and fi nal calculation results are displayed 

in the following form:

±

a

P

b

e   

± 

c

P

d

f

•  When each coeffi cient falls into the following ranges:

 a 

<

 100; 1 

<

 b 

<

 1,000; 0 

 c 

<

 100;

 d 

<

 1,000; 1 

 e 

<

 100; 1 

 f 

<

 100

•  When the number of terms in the intermediate and fi nal 

calculation results is one or two.

Note:  The result of two fractional terms that include 

r

 will be 

reduced to a common denominator.

BATTERY REPLACEMENT

Notes on Battery Replacement

Improper handling of batteries can cause electrolyte leakage or 
explosion. Be sure to observe the following handling rules:

•  Make sure the new battery is the correct type.

•  When installing, orient the battery properly as indicated in the 

calculator.

•  The battery is factory-installed before shipment, and may 

be exhausted before it reaches the service life stated in the 
specifi cations.

Notes on erasure of memory contents

When the battery is replaced, the memory contents are erased. 
Erasure can also occur if the calculator is defective or when it 
is repaired. Make a note of all important memory contents in 
case accidental erasure occurs.

When to Replace the Battery

If the display has poor contrast or nothing appears on the display 
when 

j

 is pressed in dim lighting, even after adjusting the 

display contrast, it is time to replace the battery.

Cautions

•  An exhausted battery left in the calculator may leak and 

damage the calculator.

•  Fluid from a leaking battery accidentally entering an eye could 

result in serious injury. Should this occur, wash with clean 
water and immediately consult a doctor.

•  Should fl uid from a leaking battery come in contact with your 

skin or clothes, immediately wash with clean water.

•  If the product is not to be used for some time, to avoid damage 

to the unit from a leaking battery, remove it and store in a safe 
place.

•  Do not leave an exhausted battery inside the product.

•  Keep batteries out of the reach of children.

•  Explosion risk may be caused by incorrect handling.

•  Do not throw batteries into a fi re as they may explode.

Fig. 1

Fig. 2

Содержание EL-516 Operation

















Отзывы: