Sharp DV-SV 80 H, Руководство по эксплуатации

Страница: 29 / 42

- 28 - EN
The track is played beginning from the desired time just
after you enter the time.
For your convenience:
• If you attempt to enter a number greater than the total time
of the current track, the time search box disappears and
“ ” symbol is displayed.
• If you give up entering the time simply press RETURN
button, and the operation is cancelled.
Accessing tracks using number buttons
You can play any track you want, just by pressing the
corresponding number button.
For the track numbers which are greater than “9”
use +10 button. Press this button once and then
type the two-digit track number.
If you attempt to enter a number greater than the total
number of tracks on disc, “ ” symbol is displayed on
screen.
Repeat Play
Press REPEAT during play.
Each time this button is pressed, a different repeat box is
displayed on the screen.
• If “ ” TRACK” is displayed, the current track will be
played again.
• If “ ” ALL” is displayed, the whole disc will be played
again.
• If “SCAN” is displayed, first 12 seconds of all tracks on
the disc are played sequentially.
• If “RANDOM” is displayed, tracks on the disc are played
randomly and continously.
NOTE:
• If the play list is active, the playlist is repeated instead of
the whole disc in “Repeat All” case.
• Once the REPEAT function is set, the unit will remain in
repeat mode until another button is pressed.
Repeating sections between two specific points (A
–B repeat).
Press A-B during play at the point where repeat
play is to commence (A).
“ A ” is displayed.
Press A-B again at the point where repeat play is to
be concluded (B).
“ AB ” is displayed and the repeat-play of the selection
between points A and B starts.
To return to normal play
Press A-B again. A-B Repeat is disabled.
Convenient Functions
Displaying the time information
Press TIME during play.
Each time this button is pressed, an information box is
displayed on TV screen to indicate the status of the time
displayed on the VFD display.
• If “Time Display: Single elapsed” is displayed, the VFD
display on the unit shows the elapsed time for the track
which is being played.
• If “Time Display: Single remain” is displayed, the VFD
display on the unit shows the remaining time for the track
which is being played.
• If “Time Display: Total elapsed” is displayed, the VFD
display on the unit shows the elapsed time for the disc
which is being played.
• If “Time Display: Total remain” is displayed, the VFD display
on the unit shows the remaining time for the disc which is
being played.
• If “Time Display off is displayed, OSD messages on
screen are cleared.
Program Function
Press PROGRAM to select program mode
Program list appears.
Enter numbers of tracks that you want to add to program
list.
Select “NEXT” to go to the next program page.
Select “PREV” to go to the previous program page.
Select “START” to start program mode.
Screen is cleared and files in the program list are played
sequentially.
Press PROGRAM to see the program list.
Select “STOP” to stop program mode.
Select “EXIT” to stop program mode.
For your convenience:
• You can remove the last track of the playlist by pressing
the C button.
• You can clear screen when the program list is displayed
on screen by pressing PROGRAM button.
• The program remains even after the Program Play ends
• The program is cancelled when:
- The disc tray is opened or closed
- The power is turned off.
Downloaded from: http://www.usersmanualguide.com/