Sharp DV-SV 80 H, Руководство по эксплуатации

Страница: 19 / 42

- 18 - EN
DVD PLAYBACK
Preparations
• Press on the OPERATE button of your audio system if the
player has been connected to an audio system and turn on
your TV.
Basic Play
1. Press the OPERATE button
2. Press OPEN/CLOSE to open the disc tray.
3. Place a disc onto the tray
Hold the disc without touching either of its surfaces, position
it with the printed title side facing up, align it with the guides,
and place it in its proper position.
4. Press OPEN/CLOSE.
• T h e d i s c t r a y i s a u t o m a t i c a l l y c l o s e d a n d p l a y
commences.
• A menu may appear on the TV screen after a few moments
or the film may start immediately after the introduction of the
movie Company. This behaviour depends on the disc
content and may change.
NOTE:
Step 5 is available only when a menu is shown after the
disc is inserted.
Press
3465
or the number button(s) to select
the preferred menu item.
5. Press SELECT
Play of the selected items now starts. The played item may
be a movie, a still picture or another submenu depending
on the disc.
NOTE:
When using menus the disc data content controls
the behaviour of the player.
Stopping play and returning to the menu screen
(when a menu is available on the disc)
Press MENU or TITLE button depending on the disc. Play
is suspended, and the Disc menu screen is displayed.
After operation
When the unit is not in use, remove the disc and press the
OPERATE button to turn off the unit.
NOTE:
• The disc continues to rotate while the menu is displayed
even after the player has finished playing a particular item.
When no further selections are to be played, be sure to
press the STOP button to clear the menu display.
• If the disc is placed upside down (and it is a single sided
disc), the VFD display on the player will indicate NO DISC.
For your reference:
• If an action corresponding to a button is prohibited the
“ ” symbol appears.
Stopping Play
Press stop twice.
For your convenience:
• When STOP is pressed once, while the play continues,
the unit records the point where the play is stopped and if
the
PLAY key is pressed, playback resumes from the point
where the STOP key was pressed. When the tray is
opened or the STOP is pressed again, the RESUME
function will be cleared.
• To stop the play permanently, press STOP twice. When
the STOP button is pressed for the first time, a message
“PRESS PLAY TO CONTINUE” will appear on the screen to
remind you if you want to continue the play. To stop the play,
press the
STOP button again or you can press SELECT or
PLAY to continue.
Some discs, however may not let you to continue from the
point you have stopped. In such case, you will not see
warning
“PRESS PLAY TO CONTINUE” on the screen at
the time you STOP the playback. In this case after pressing
PLAY button disc will start playback from the beginning.
Rapid Advance / Rapid Reverse
Press SLOW/SEARCH ( Fast reverse or Fast
forward) on the remote control or Search or
on the main unit during play.
• Normal play is resumed when the SELECT button is
pressed or PLAY/PAUSE button is pressed twice.
• The speed of advance ( 2x, 4x, 8x, 16x,
32x) or reverse ( 2x, 4x, 8x, 16x, 32x)
changes for every press of the or button.
Skipping Ahead or Back to Chapters
Skipping ahead
Press SKIP/ FRAME (Next) on the remote control
or SKIP on the main unit during play.
A chapter is skipped forward each time the button is
pressed.
Skipping back
Press SKIP/ FRAME (Previous) on the remote
control or SKIP on the main unit during play.
When the button is pressed once midway through a
chapter, play returns to the previous chapter.
Downloaded from: http://www.usersmanualguide.com/