[5] SIMULATIONS
1. Entering the simulation mode
A. Copy mode
The following key operations allow to enter the simulation mode from
the copy mode.
Clear key
→
Interruption key
→
“0” key
→
Interruption key
→
Main
code
→
Start key
→
Sub code
→
Start key
B. FAX mode
The following key operations allow to enter the simulation mode from
the FAX mode.
Clear key
→
Interruption key
→
“0” key
→
Interruption key
→
Main
code
→
Start key
→
Sub code
→
Start key
Or perform the following key operations:
“9” key
→
“ ” key
→
“8” key
→
“#” key
→
“7” key
2. Cancel of simulation mode
Press the clear all key to cancel the simulation mode.
Press the interruption key to interrupt the operation and return the sub
code entry menu.
3. Simulation list
A. Copy mode <Related to the FAX kit>
Main
code
Sub
code
Content
22
20
FAX print counter display
24
11
FAX print counter clear
13
Scan counter clear
26
1
Option switch display
48
1
Main scanning (Front/Rear) direction
magnification ratio adjustment (Common in copy,
FAX/OC, SPF)
6
OC mode sub scanning direction magnification
ratio adjustment in FAX mode
7
SPF mode sub scanning direction magnification
ratio adjustment in FAX mode
∗
This Service Manual describes only the items related to the FAX kit.
For the other items, refer to the Service Manual of the main machine.
B. FAX mode
Main
code
Sub
code
Content
∗
22
11
Fax related counter display
14
Fax ROM ver. Display
24
14
FAX related counter clear
46
12
FAX mode density adjustment (AUTO)
14
FAX mode density adjustment for each
resolution (Fine)
15
FAX mode density adjustment for each
resolution (Super Fine)
16
FAX mode density adjustment for each
resolution (Ultra Fine)
64
02
User switch front print
03
Soft switch setting table print
04
Dump list print
66
01
FAX related soft SW setup check/change
02
FAX related soft SW clear (Excluding
adjustment values)
03
FAX PWB memory check
04
Signal send mode
06
Confidential communication password print
07
Image memory contents output
08
Voice message clear
A
10
Image memory clear
11
300bps signal send
13
Dial test
17
DTMF signal send mode
22
Handset sound volume adjustment
A
30
TEL/LIU status change check
32
Received data check
34
Communication time measurement/check
37
Speaker sound volume adjustment
38
Time setup/check
∗
A: Not used
∗
1: Counter display method
To display 12345: “123” (0.75sec)
→
Blank (0.3sec)
→
“456” (0.7sec)
→
Blank (1.0sec)
→
Repeat
∗
2: Display after clearing each counter
“000” (0.7sec)
→
Blank (0.3sec)
→
“000” (0.7sec)
→
Blank (1.0sec)
→
Repeat
4. Details of simulations
A. Copy mode
Main
code
Sub
code
Content
Operational description
Initial
value
Set
range
22
20
FAX print counter
display
Used to display the current Fax print counter value.
∗
1
24
11
FAX print counter clear
Used to clear the Fax printer counter.
∗
2
13
Scan counter clear
Used to clear the scan counter.
∗
2
DM-FX1
5 – 1