15) Attach the left cabinet to the copier.
●
Attach the left cabinet using the screw, then pass the speaker har-
ness through the hole of the PWB mounting frame and connect the
speaker harness to the connector of the copier.
Note: Take care so that the speaker harness does not become caught
between the corner frame and the left cabinet.
16) Attach the TEL/LIU PWB.
●
Attach the TEL/LIU PWB to the PWB mounting frame using the sup-
plied M3 screws (gold color)(9), and then connect the TEL/LIU PWB
and FAX PWB using the FFC harness.
Note: Before attaching the FFC harness, release the connector lock
and insert the cable. After attaching, lock the connector.
17) Attach the shield plate.
●
Attach with the screw.
18) Attach the ground plate.
●
Hang the hook, and fix with M3 screw (gold) packed together.
19) Attach the rear cabinet of the machine.
●
Cut off the notch section in the rear cabinet with nippers so that the
cut surface is flat. Attach the FAX connector cover.
Fix with the screw and attach the document cover.
20) Time setup check.
●
Change the time setup referring to the SIM 26-22.
21) Stick the label to the rear cabinet of the copier.
●
Stick the FCC Registration Label to the position shown in the illustra-
tion.
In order to manifest the compliance with FCC Part 68 and IC
CS-03, it is required to provide the machine with the FCC
Registration Number (USA), Ringer Equivalence (USA) and
Ringer Equivalence (Canada).
After installing the FAX expansion kit in the machine, please put
the registration label, packed with the kit, on the prescribed
location.
After installing this kit to the product, stick the supplied FCC Registra-
tion Label to the specified location.
2. Expansion memory attachment (AR-
MM5, MM6, MM7)
1) Remove the FAX connector cover with a screwdriver.
2) Insert the memory card so that the model name is on the back.
3) Attach the FAX connector cover.
M3x6
Speaker harness
M3 x 8 for steel
Caution
Blue line(To the right)
M3X6
M3X6
M3X6
M3X6
M3 x 8 for steel
M3x6
M4 x 10 for plastic
M3 x 8 for steel
FAX connector cover
5mm
FCC Registration Label
Reference line
Power off position
Power on position
(1)
(1)
(2)
(3)
(3)
DM-FX1
3 – 3
