background image

ENGLISH

E-3

CONSUMER LIMITED WARRANTY

TO OBTAIN SUPPLY, ACCESSORY OR PRODUCT INFORMATION, CALL 1-800-BE-SHARP, OR VISIT OUR WEBSITE AT 

www.sharpusa.com

SHARP ELECTRONICS CORPORATION

Sharp Plaza, Mahwah, New Jersey 07430-2135

CONSUMER LIMITED WARRANTY FOR THE U.S. USERS
SHARP ELECTRONICS CORPORATION warrants to the first consumer purchaser that  this Sharp brand product 

(the “Product”), when shipped in its original container, will be free from defective workmanship and  materials, and 

agrees that it will, at its option, either repair the defect or replace the defective Product or part thereof with a new or 

remanufactured equivalent at no charge to the purchaser for parts or labor for the period(s) set forth below.

This warranty does not apply to any appearance items of the Product nor to the additional excluded item(s) set forth 

below nor to any Product the exterior of which has been damaged or defaced, which has been subjected to improper 

voltage or other misuse, abnormal service or handling, or which has been altered or modified in design or construction. 

In order to enforce the rights under this limited warranty, the purchaser should  follow the steps set forth below and 

provide proof of purchase to the servicer. 

The limited warranty described herein is in addition to whatever implied warranties may be granted to purchasers by 

law. ALL IMPLIED  WARRANTIES INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR 

USE ARE LIMITED TO THE PERIOD(S) FROM THE DATE OF PURCHASE SET FORTH BELOW. Some states do not 

allow limitations on how long an implied warranty lasts, so the above limitation may not apply to you. 

Neither the sales personnel of the seller nor any other person is authorized to make any warranties other than those 

described herein, or to extend the duration of any warranties beyond the time period described herein on behalf of 

Sharp. 

The warranties described herein shall be the sole and exclusive warranties granted by Sharp and shall be the sole and 

exclusive remedy available to the purchaser. Correction of defects, in the manner and for the period of time described 

herein, shall constitute complete fulfillment of all liabilities and responsibilities of Sharp to the purchaser with respect 

to the Product, and shall constitute full satisfaction of all claims, whether based on contract, negligence, strict liability 

or otherwise. In no event shall Sharp be liable, or in any way responsible, for any damages or defects in the Product 

which were caused by repairs or attempted repairs performed by anyone other than an authorized servicer. Nor shall 

Sharp be liable or in any way responsible for any incidental or consequential economic or property damage. Some 

states do not allow the exclusion of incidental or consequential damages, so the above exclusion may not apply to you. 

THIS WARRANTY GIVES YOU SPECIFlC LEGAL RIGHTS. YOU MAY ALSO HAVE OTHER RIGHTS WHICH VARY 

FROM STATE TO STATE. 

Your Product Model Number & Description: 

Warranty Period for this Product: 

Additional Item(s) Excluded From Warranty 

Coverage (If any):

 

Where to Obtain Service:

What to Do to Obtain Service:

 

CV-P12PX,CV-P13PX,CV-PD13PX

Portable Air Conditioner. Be sure to have this information available 

when you need service for your Product. 

One (1) year parts and labor from date of purchase. The warranty 

period continues for a total of five (5) years from date of purchase 

for the Sealed Cooling System parts; labor and service are not 

provided free of change for this additional period.

Appearance items of the Product, filters, or accessories, or any 

printed materials. 

Product which has been used for rental and/or commercial 

purposes.

From a Sharp Authorized Servicer located in the United States. 

To find the location of the nearest Sharp Authorized Servicer, call 

Sharp Toll Free at 1-800-BE-SHARP. 

Contact your Sharp Authorized Servicer to obtain in-home service 

for this Product. 

The Servicer will come to your home, and if it is necessary to 

remove the Product, the Servicer will reinstall it. Be sure to have 

Proof of Purchase available. 

CV-P13PX_eng.indd   5

09.1.26   3:36:13 PM

Содержание CV-2P13SX



































Отзывы: