Sharp CV-2P13SX Скачать руководство пользователя страница 30

Страница: 30 / 34

Press the MEGA COOL button during cooling

mode.

• The remote control will display "

" .

• The temperature display will go off.

• The green MEGA COOL lamp on the unit will light.

TO CANCEL

Press the MEGA COOL button again.

• MEGA COOL operation is also cancelled when the

mode is changed, or when the unit is turned off.

• The green MEGA COOL lamp on the unit will turn

off.

MEGA COOL OPERATION

In this operation, the air conditioner fan works at extra high speed with a setting

temperature of 59°F.

E-28

NOTES:

• You cannot set the temperature or fan speed during MEGA COOL operation.

• The fan returns to the HIGH speed setting after the unit has run for 30 minutes in MEGA

COOL mode.

• The extra high fan speed may automatically slow down to protect the unit.

When SLEEP operation is set, the temperature setting is automatically adjusted to

prevent the room from becoming too cold.

SLEEP OPERATION

Press the SLEEP button during cooling

mode.

• The remote control displays “

”.

• The orange TIMER lamp on the unit will light.

• The unit will stop operating after 8 hours.

• The fan speed setting is set to AUTO.

TO CANCEL

Press the SLEEP button.

• The orange TIMER lamp on the unit will turn off.

• SLEEP operation is also cancelled when the mode

is changed, or when the unit is turned off.

Start of

SLEEP operation

Unit shuts off

2˚F

1hour

8hours

1hour

NOTES:

• One hour after the SLEEP operation is started, the

temperature setting rises by 2˚F and after another

hour it rises by an additional 2˚F. Temperature display

on the remote control will not change from its original

setting.

• SLEEP operation and MEGA COOL operation can

not be used together.

• The OFF TIMER, ON TIMER and SLEEP operation

can not be set together.

Only the most recent settings will be used.

CV-P13PX_eng.indd 30

09.1.26 3:36:29 PM

Содержание CV-2P13SX



































Результаты поиска

Содержание CV-2P13SX

Отзывы:

Похожие инструкции для CV-2P13SX

Бренды по названию

Популярные бренды

Sharp CV-2P13SX, Инструкция по установке и эксплуатации

Результаты поиска

Содержание CV-2P13SX

Отзывы:

Похожие инструкции для CV-2P13SX

Бренды по названию

Популярные бренды