background image

<P=005>

(Continued)

Red

Black

Black

Red

RATED SPEAKER IMPEDANCE : 8 OHMS MIN.
IMPEDANCE NOMINALE DU HAUT-PARLEUR :

8 OHMS MINIMUM

Right

Left

White
line

White
line

Sub woofer

Connect the sub woofer wire to the SUB WOOFER terminals as
shown.
Use a speaker with an impedance of 8 ohms or more, as a lower
impedance speaker can damage the unit.

Connect the black wire to the minus (

) terminal, and the red

wire to the plus (+) terminal.

Surround speakers

Connect each surround speaker wire to the SURROUND
SPEAKER terminals as shown.
Use speakers with an impedance of 8 ohms or more, as lower
impedance speakers can damage the unit.

Connect the wire with the white line to the minus (

) terminal

and the plain wire to the plus (+) terminal.

Caution:

Do not short out the speaker wires. When the power
is on and the speaker wires are shorted out, "PRO-
TECT" will appear and the unit will enter the stand-by
mode. (See page 42.)

Do not reverse the right channel and left channel
wires when connecting the speakers to the unit.

Do not let bare speaker wires touch each other, as this may
damage the amplifier and/or speakers.

Do not allow any objects to fall into or to be placed in the bass
reflex ducts.

Do not stand or sit on the speakers. If the speakers fall or
collapse, you may be injured.

CD-C491H(SUK) TINSE0229AWZZ

5

Содержание CD-C491H

















































Отзывы: