(Continued)
The best sound will be achieved by placing the front speak-
ers, centre speaker and surround speakers at the same dis-
tance from the listener.
When some of the speakers are at a different distance from
the listener, you can select a speaker delay to make it seem
as though the speaker distances are the same.
(Factory-shipped settings: CENTER
→
0 ms, SURROUND
→
5 ms)
If the settings need to be changed due to the type of sound
source being played or the conditions in the room, change
them as follows.
1
Press the MENU button repeatedly to make "SP DELAY"
appear.
2
Within 10 seconds, press the ITEM button to select "CEN-
TER" or "SURROUND".
CENTER: To delay the sound from the centre speaker
SURROUND: To delay the sound from the surround
speakers
●
The selected speaker indicator(s) will flash.
3
Within 10 seconds, use the jog dial or the SET UP (
W
or
X
) button on the remote control to select a value.
Adjustable range
CENTER: 0 ms - 5 ms
SURROUND: 0 ms - 15 ms
(Can be changed in 1 ms steps.)
Notes:
●
As a guide for setting the correct delay time, 1 ms is equal
to approximately 30 cm (12") from where the selected
speakers are placed further away from the listener than
the typical location.
●
If the delay time for the surround speakers is set to a large
value, a large sound space will be created. If it is set to
a small value, the sound space will be small and intimate.
■
Speaker delay setting
Jog
dial
ITEM
ITEM
MENU
SET UP
MENU
0
1
4
5
0
1
14
15
1
2,3
The output level of each speaker can be adjusted.
1
Press the MENU button repeatedly to make "SP LEVEL"
appear.
2
Within 10 seconds, press the ITEM button repeatedly to
s e l e c t t h e s p e a k e r ( CE N T E R, RS UR RO UN D,
LSURROUND or S-WOOFER) you want to adjust.
●
The selected speaker indicator will flash.
3
Within 10 seconds, use the jog dial or the SET UP (
W
or
X
) button on the remote control to adjust the level.
●
You can change the level within a range of +7dB to –7dB,
in 1dB steps.
■
Speaker level setting
1
2,3
CD-C491H(SUK) TINSE0229AWZZ
32