manualshive.com logo in svg

Sharp CD-C491H, Руководство по эксплуатации

Поделиться
Скачать
Sharp CD-C491H Скачать руководство пользователя страница 18

RADIO OPERATION

TUNER
(BAND)

TUNING
 (        )

ON/
STAND-BY

■

Tuning

(Main unit operation)

1

Press the ON/STAND-BY button to turn the power on.

2

Press the TUNER (BAND) button.

3

Press the TUNER (BAND) button to select the desired
frequency band. (FM ST, FM, MW or LW)

4

Press the TUNING (

X

 or 

W

) button to tune into the de-

sired station.

Manual tuning:
Press the TUNING (

X

 or 

W

) button as many times as re-

quired to adjust the frequency shown on the display to the
frequency of the desired station.

Auto tuning:
When the TUNING (

X

 or 

W

) button is pressed for more

than 0.5 seconds, scanning will start automatically and the
tuner will stop at the first receivable broadcast station.

Notes:

●

When radio interference occurs during auto scan tuning,
auto scan tuning may stop automatically at that point.

●

If a weak station signal is found during auto scan tuning,
the station will skipped.

●

To stop the auto tuning, press the TUNING (X or W) button
again.

●

When an RDS (Radio Data System) station is tuned in,
the RDS indicator will light first, and then the frequency
will be displayed. Finally, the station name will appear.

5

To receive an FM stereo transmission, press the TUNER
(BAND) button so that the "ST" indicator on the display
lights up.

●

"

j

" will appear when an FM broadcast is in stereo.

6

If the FM reception is weak, press the TUNER (BAND)
button so that the "ST" indicator goes out.

●

Although the reception changes to monaural, the sound
becomes clearer.

After use:

Press the ON/STAND-BY button to enter the stand-by mode.

Note:

●

The last station tuned in will be recalled, even after chang-
ing the tuning band or the function, or after switching the
unit to the stand-by mode.

CD-C491H(SUK) TINSE0229AWZZ

17

Содержание CD-C491H

















































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды