(Continued)
Jog dial
■
Cue and review
(Main unit/remote control operation)
1
Load a disc and begin playback.
2
Hold the CUE
2
(
2
/
4
) button down for audible
fast forward, and hold the REV
3
(
3
/
5
) button
down for audible fast reverse.
3
Normal playback will resume when the REV
3
(
3 /
5
) or CUE
2
(
2 / 4
) button is released.
Notes:
●
When the end of the disc is reached whilst cueing, "END"
will appear in the display. (Even though the next disc has
been loaded, the disc will not be switched.)
Press the REV
3
(
3 / 5
) button for fast reverse or
press the
■
(CD
■
) button to stop CD operation.
●
When the beginning of the first track is reached, normal
playback will start.
■
APSS (Auto Program Search System)
APSS automatically locates the beginning of any track.
To listen to the track being played again:
(Main unit operation)
Turn the jog dial anticlockwise or press the
3
button for
less than 0.5 seconds during playback.
(Remote control operation)
Press the
3 / 5
button for less than 0.5 seconds during
playback.
To move to the beginning of the next track:
(Main unit operation)
Turn the jog dial clockwise or press the
2
button for less
than 0.5 seconds during playback.
(Remote control operation)
Press the
2 / 4
button for less than 0.5 seconds during
playback.
●
To skip a number of tracks at one time, turn the jog dial
on the main unit or press the
3 / 5
or
2 / 4
button
on the remote control repeatedly until the desired track
number is shown.
●
To start playing at a desired track, turn the jog dial on the
main unit or press the
3
/
5
or
2
/
4
button on
the remote control whilst in the stop mode to select the
track number. Then press the
0
/
R
button.
Note:
APSS will move forward or backward from any point on the
disc before playback begins. It will not move forward during
playback of the final track.
Caution:
●
Do not carry the unit with discs left in the disc
trays. The discs may come loose inside the unit,
and they may be damaged or cause damage to the
unit. This may also cause malfunctions.
●
Do not place two CDs in one disc position.
●
Do not push the disc tray whilst it is moving.
●
Do not attempt to turn the disc tray by hand.
This may cause malfunctions.
●
If the power fails whilst the tray is open, wait until the
power supply is restored.
●
If the disc tray is stopped forcibly, "ERROR" will ap-
pear in the display and the unit will not function.
If this occurs, press the ON/STAND-BY button to enter
the stand-by mode and turn it on again.
●
If TV or radio interference occurs during CD operation,
move the unit away from the TV or radio.
●
If a disc is damaged, dirty, or loaded upside down,
the disc will be skipped and the next disc will play
automatically.
●
Do not press the ON/STAND-BY button frequently dur-
ing CD playback. If you do, the "E-01" error will be
displayed and the CD may not operate. If this hap-
pens, press the ON/STAND-BY button one more time,
to enter the stand-by mode. Then, turn the power on
again. The error will be cancelled.
CD-C491H(SUK) TINSE0229AWZZ
14
