Sharp AR-SS2, Руководство по обслуживанию

Страница: 23 / 48

D. Staple sort mode
When the staple mode is set, stapling is automatically performed after
sorting the copies.
1) The same operations as the sort mode are performed and all
copied papers are discharged to the bins.
↓
↓
↓
↓
↓
↓
2) The guide bar oscillates.
↓
↓
↓
↓
3) The guide bar aligns the paper.
The stapler unit is shifted to the stapling position.
At the same time, the paper holding arm holds discharged
paper.
↓
↓
↓
↓
↓
4) The stapler unit staples the paper.
↓
5) The guide bar, the paper holding arm, and the stapler unit are
separated from the paper.
↓
6) The bin is shifted by one.
↓
↓
↓
↓
↓
7) Procedures 3 to 6 are repeated for all paper in the bins, and the
operation is completed.
Note: The staple sort mode is valid only when the RADF is used. In
the book mode, the staple sort mode can be set, but automatic
stanpling cannot be performed.
Discharged paper
Discharged paper
Stapler unit
Paper holding arm
Paper
Bin
Paper holding arm
Bin supporting arm
AR-SS2
9 – 4