Sharp AR-SS2, Руководство по обслуживанию

Страница: 16 / 48

[6] DIAGNOSTICS
1. PWB
2. List of DIP switch functions
The functions of the DIP switch (SW1) on the sorter controller PWB
are as follows:
Purpose DIP switch setup Content
Normal copy state
•
When all are set to OFF, the machine returns to the normal mode.
Transport motor (M2)
•
When the manual staple key (SW) is pressed, the transport motor (M2)
rotates forward (in the paper transport direction). To stop the motor,
press the manual staple key (SW) again.
Sensor adjustment mode (Bin
paper sensor)
•
When the manual staple key (SW) is pressed, adjustment of the bin
paper sensors (S1, S2) is performed. (For details, refer to page 5-1)
Adjustment complete: Manual staple key (SW) ON
Adjustment error: Manual staple key (SW) blinking
In case of an adjustment error, check which sensor is malfunctioning by
the error code.
Error code F1-91: S1, S2 error
Guide for operation range
adjustment mode (When A4
size is used)
•
For details, refer to page 5-1.
Guide bar operation range
adjustment mode (When letter
size is used)
•
For details, refer to page 5-1.
Guide bar operation text
•
When the manual staple key (SW) is pressed, the guide bar operates.
The operation of A4R -> B5 -> Letter R -> A4R is repeated. When the
manual staple key is pressed again, the guide bar returns to the home
position.
Stapler unit oscillation position
adjustment
•
For details, refer to page 5-2.
∗
1: Do not move No. 6 of DIP switch, which is used only for selection of the communication system with the copier.
(ON: Now IPC communication / OFF: Old IPC communication)
SW1 LED SW2 SW3
ON 1
1 2 3 4 5 6
ON
1 2 3 4 5 6
1
ON
1 2 3 4 5 6
1
ON
1 2 3 4 5 6
1
ON
1 2 3 4 5 6
1
ON
1 2 3 4 5 6
1
ON
1 2 3 4 5 6
1
AR-SS2
6 – 1