Sharp AR-RB1, Руководство по обслуживанию

Страница: 11 / 36

AR-RB1 DESCRIPTION OF OPERATION 4 - 4
B. When the paper length is 250mm or more (B5R or more)
(The paper input motor, upper turnover motor and lower turnover motor all operate.)
As for the relation between the process speed and the transport speed
in RB1, refer to the table (3)-A. Sensor input, motor output, solenoid output timing is as below.
Processing speed
The paper input motor and
upper turnover motor are
caused to turn in time with the
copier processing speed, thus
transporting the paper. When the trailing edge of the paper
reaches a point 13mm from the copier
POD off, the transport speed in RB1
is accelerated.
Trailing edge of paper reaches
point 13mm from POD off
Transport speed
(high speed)
Transport speed
(high speed)
When the trailing edge of the
paper reaches the upper reverse
stop point, the upper turnover
motor and the lower turnover
motor stop.
Motor stop
(paper stop)
The upper turnover motor and the
lower turnover motor are caused to
revolve in the paper delivery direction,
and the paper is discharged. The lower reverse motor stops at
BPPD1 off, when the trailing edge of the
paper reaches a point 50mm before the
delivery roller, the transport speed
decreases.
Trailing edge of paper
reaches point 50mm
before delivery roller
After the trailing edge of the paper
passes the delivery roller, the
upper turnover motor stops.
Transport
speed
(low speed)
Lower
turnover
motor stop
Motor stop
(discharge complete)
POD
(Paper exit
sensor)
BPPD1
(Transport
sensor 1)
BPRD
(Reverse section
detection sensor)
BPOD
(Paper-out sensor)
BIM
(Paper-in motor)
BRM
(Upper reverse
motor)
(Direction of paper-in)
(Direction of paper-out)
(Direction of paper-in)
(Direction of paper-out)
BTM
(Lower reverse
motor)
BGSOL
(Gate solenoid)
Process speed
Process speed
High speed
High speed
High speed
High speed
Low speed