Sharp AR-PB2A, Руководство по обслуживанию

Страница: 9 / 40

Function Macintosh PPD file
Font Resident Font 35 fonts
Category 1
In font chapter
Download Font N/A
Others Configuration
Setting Yes
Watermark N/A
Form Overlay N/A
Confidential Print Yes
(PIN selection)
Print Accounting Yes
Tandem Print Yes
Job End Notification N/A
NOTE: When the AR-PB2A is installed in AR-505/507/407/337/287,
the Printer Administration Utility is fully functional; however, if
the AR-PB2A is installed in other models, its functionality is
limited as follows:
AR-505/507/407/
337/287 All functionality is supported.
AR-405/336/286/
281/250 Printing Settings tab and Resources
tab are not displayed.
AR-335/285/280 Printing Settings tab and Resources
tab are not displayed. Some
information display may be limited.
B. Details
(1) Connectivity
a. Direct Connection
The Cougar print system supports IEEE 1284 (parallel)-connection.
Direct Connection Type Properties
IEEE 1284
•
IEEE 1284 Compliant
•
Compatible
•
Connector: 1 (Type B)
b. Internal Network Connection
The Cougar print system supports an internal network connection.
Installing either of the following print server cards allows the system to
connect to the network.
Model Name Network Type
AR-NC3D 10Base-T / 100Base-TX
c. Network Print Channel
The Cougar printing system supports the following network print
channels.
•
PSERVER for NetWare Environment
•
LPR / LPD
•
EtherTalk (AppleTalk)
•
FTP
•
TCP Raw Socket
(2) Printer Controller
a. Hardware
CPU: R4700 150MHz(64Bits RISC)
Peripheral ASIC: Galileo-Technology GT-64010A
DRAM Controller
DMA-4 ch (SCSI, P1284, IDE, Option I/F)
ROM:
Flash ROM 8 MB
(Boot (Sim)&Main Program/ Roman Font)*1
EEPROM 8 KB
RAM:
DRAM 16 MB (EDO)
SIMM 2 slots: 16/32 MB (Max. 32x2 + 16 = 80 MB)
Host I/O:
P1284 1ch: B connector (CL-CD1283)
16bits bus DMA
External I/O 1ch: DPO Type2 for DPI (HBM) NIC (optional)
Engine I/F:
SCSI-2 1ch: Asynchronous and Synchronous/16bits
bus DMA
b. Firmware
Job Control: PJL(PJL is used in emulations other than
PCL5e.)
Emulation: PCL5e
PostScript
Emulation Switching AUTO, PS, PCL
Resident Fonts:
PCL5e (SPDL) 80 Fonts (HP8000 Typeface compatible)
Lineprinter
PostScript
Roman 80 Fonts (Adobe PS Printer Typeface com-
patible)
PCL6 80 Fonts
Host I/O:
P1284
Compatible, Nibble for PnP
External I/O DPO Type2 for DPI (HBM) NIC
I/O Switching AUTO, P1284, NIC
Engine I/F:
SCSI-2 Asynchronous and Synchronous /DMA transfer
c. Emulation
Automatic (PCL5e
↔
PS
↔
PCL6)
PCL (fixed)
PostScript (fixed)
SPDL (fixed)
Emulation switching is performed in the following manner.
PJL Command
for Specifying
an Emulation
Specified
Emulation
Emulation Setting
Automatic Fixed
Automatic
Sensing
No OK Uses the
emulation
automatically
selected. Uses a default
emulation.
NG Uses PCL
Yes Yes Uses the emulation
specified. Uses the
emulation
specified.
No Uses PCL Uses a default
emulation.
In the automatic emulation sensing mode, for print data without the
PJL command, the emulation is automatically switched either to Post-
Script, PCL5e based on data sensed. In other words, automatic
emulation sensing (switching) is available only between PostScript
and PCL5e. For print data with the PJL command, the emulation is
automatically switched to the specified one without sensing the data.
When print data without the PJL command fails to be sensed, or
when the print data is given the PJL command but the specified
emulation is not present, the data is handled in the PCL emulation.
In the fixed emulation mode, for print data without the PJL command,
the fixed emulation is used to handle the print data. Print data with the
PJL command is switched to the specified emulation. When print data
is given the PJL command but the specified emulation is not present,
the data is processed by the default emulation.
The PJL Enter command specifies PostScript and PCL5e.
AR-PB2A
2 – 4