manualshive.com logo in svg

Sharp AR-P15, Руководство по обслуживанию

Поделиться
Скачать
Sharp AR-P15 Скачать руководство пользователя страница 27

21

System Software

12.

Configure AR-P15 settings.

It is the network administrator’s responsibility to configure settings according to the 
network and user environment. Default settings may be adequate, but they may not be 
optimal for the user’s environment. 

Automatic IP addressing is a default network setting. If the IP address is not set, it will be 
listed in the Setting List as 0.0.0.0, and the network administrator may need to configure 
the IP address of the AR-P15 manually through the Control Panel LCD. After the 
network address of the AR-P15 is configured (either automatically or manually), the 
AR-P15 can be set up using TopAccess on a remote computer. For more information on 
setting up the AR-P15, see the 

Administrator’s Guide

. 

N

OTE

:

After entering the IP address manually, make sure to reset the AR-P15 (using 

either the LCD or TopAccess). To reset the AR-P15 using the Control Panel LCD, touch 
the UTILITY tab>Functions icon>Reset icon. See page 14 for the location of the 
UTILITY tab.

13.

Power off the copier and the PC before removing the parallel cable.

Содержание AR-P15











































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды